- ページ 2

冷蔵庫 Ariston BDR 190 NAのPDF お手入れ、使用および設置に関する小冊子をオンラインで閲覧またはダウンロードできます。Ariston BDR 190 NA 32 ページ。 Ariston bdr190na: user guide
Ariston BDR 190 NA にも：寸法 (2 ページ), お手入れ、使用および設置に関する小冊子 (32 ページ), お手入れ、使用および設置に関する小冊子 (10 ページ)

ページを印刷する

Installation

! Before placing your new appliance into operation

please read these operating instructions carefully. They

contain important information for safe use, for

installation and for care of the appliance.

! Please keep these operating instructions for future

reference. Pass them on to new owners of the

appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free

room.

2. Do not obstruct the rear fan grills. The compressor and

condenser give off heat and require good ventilation to

operate correctly and save energy.

3. Ensure the appliance is away from any sources of heat

(direct sunlight, electric stove, etc.).

The product was designed exclusively for built in

installation and must not be directly exposed to

atmospheric agents.

Levelling

1. Install the appliance on a level and rigid floor.

2. If the floor is not perfectly horizontal, adjust the

refrigerator by tightening or loosening the front or rear

feet.

All manuals and user guides at all-guides.com

Electrical connections

After the appliance has been transported, carefully place it

vertically and wait at least 3 hours before connecting it to

the electricity mains. Before inserting the plug into the

electrical socket ensure the following:

The electrical outlet is grounded and compliant with all

electrical codes.

The outlet can withstand the maximum power of the

appliance, which is indicated on the data plate located

on the right side of the horizontal surface in the top

compartment, under the thermostat (e.g. 150 W).

The voltage is within the range of values indicated on

the data plate located on the right side of the horizontal

surface in the top compartment, under the thermostat

(e.g. 110V).

The outlet is compatible with the plug of the appliance.

If the outlet is incompatible with the plug, ask an

authorised technician to replace it (see Assistance).

Do not use extension cords or multiple sockets.

! Once the appliance has been installed, the power supply

cable and the electrical outlet must be easily accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced by

authorised technicians only (see Assistance).

! The manufacturer declines any liability should

these safety measures not be observed.