- ページ 2
舶用機器 AEP MP2x8i NMEA BufferのPDF インストールとユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEP MP2x8i NMEA Buffer 2 ページ。 Buffer
AEP MP2x8i NMEA Buffer にも： インストールとユーザーマニュアル (9 ページ)
ページを印刷する
Operation modes
1. Auto-switching mode: If input signal #1 is lost for 30 seconds,
it will automatically switch to input #2.
2. Dual (independent) mode: Two independent buffers with 1-in and 4-out signals.
Power
In
9-36 VDC
1
Terminal description
DIP-switch:
SW1 On: Auto-switching mode
SW1 Off: Dual (independent) mode
SW2: Not available
LED indicators:
Power LED: Will blink continuously when
power input is connected correct
Auto-switching mode: Input 1 LED and input 2
LED will blink simultaneously at data rate
Dual mode: Input 1 LED and input 2 LED will
blink separately at data rate
Caution: Do not install or disassemble
your equipment when the power
supply is connected to the device.
Failure to do so could result in personal
injury or damage to the equipment.
© 2020 AEP Marine Parts B.V. - The contents of this manual
may not be reproduced or distributed without our written
permission. This manual may be changed without prior notice.
Out
Out
Out
In
1
2
2
Auto-switching mode
Dual (independent) mode
Out
Out
Out
Out
3
4
5
6
Input
PWR + 9-36 VDC
PWR – 9-36 VDC
Ground
NMEA 1 in +
NMEA 1 in -
Ground
NMEA 2 in +
NMEA 2 in -
Output
Out 1 A
Out 1 B
Out 2 A
Out 2 B
Out 3 A
Out 3 B
Out 4 A
Out 4 B
Output
Out 5 A
Out 5 B
Out 6 A
Out 6 B
Out 7 A
Out 7 B
Out 8 A
Out 8 B
DIP-
Out
switch
8
7
-> Talker 1
-> Talker 2
-> Listener 1
-> Listener 2
-> Listener 3
-> Listener 4
-> Listener 5
-> Listener 6
-> Listener 7
-> Listener 8