- ページ 18
冷蔵庫 Ariston NMBT 1922 F TのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Ariston NMBT 1922 F T 24 ページ。 Refrigerator/freezer combination
ページを印刷する
Start-up and use
Starting the appliance
GB
! After transportation of the appliance, carefully place it in
an upright position and wait at least 3 hours before
connecting it to the electricity mains, to make sure it
operates as it should.
• Clean the inside of the refrigerator well using warm
water and bicarbonate of soda before placing food
inside it.
• The appliance comes with a motor protection control
system which makes the compressor start
approximately 8 minutes after being switched on.
The compressor also starts each time the power
supply is cut off whether voluntarily or involuntarily
(blackout).
Freezer Compartment
When the product is switched on (the ON/OFF button is
pressed for more than two seconds) the freezer
compartment is set to its default value of -18°C. We
recommend that the SUPER FREEZE function is set (the
freezer display shows the text "SF") in order to accelerate
the cooling process of the compartment; when the inside
of the compartment has reached its optimal temperature
the function will be deactivated and the food may be
placed inside.
Refrigerator Compartment
When the appliance is switched on the refrigerator
compartment is set to its default value of +5°C. We
recommend that the SUPER COOL function is set (the
refrigerator display shows the text "SC") in order to
accelerate the cooling process of the compartment. After
a few hours it will be cool enough for food to be placed
inside.
Navigating the display
Setting the temperatures:
If the product is switched on, the refrigerator and freezer
displays will indicate the temperatures set at that
moment. To change them, simply press the + and -
buttons corresponding to the compartment for which you
wish to change the set temperature. To be specific, each
time one of the buttons is pressed the temperature is
increased or decreased by 1°, and the number of
illuminated horizontal bars is adjusted accordingly. The
temperature values that may be selected for the
refrigerator compartment are +8°C, +7°C, +6°C, +5°C,
+4°C, +3°C and +2°C, while the values that may be set
for the freezer are -18°C, -19°C, -120°C, -21°C, -22°C, -
24°C and -26°C.
The temperatures are automatically set to +5°C for the
refrigerator compartment and -18°C for the freezer
18
compartment (these are standard food storage values).
When the "I Care" function is active, the appliance
automatically adjusts the temperatures according to the
conditions inside and outside the refrigerator; the
operation of this function is signalled by the text "AUTO".
Whenever it is necessary to activate the "I Care" function
at temperatures that are different to the standard storage
values, the "I Care" button must be pressed as soon as
the function is activated and held down while the new
temperatures are set using the + and - buttons. Under
these conditions, the temperatures may be set to 4°C,
5°C and 6°C for the refrigerator compartment and -18°C,
-19°C and -20°C for the freezer compartment.
When the HOLIDAY function is active the temperature
may not be adjusted, however the appliance adjusts itself
automatically so that the optimal settings for the situation
are used: +12°C for the refrigerator compartment and -
18°C for the freezer compartment. This function is
indicated by the text.
To activate and deactivate the functions simply press the
relevant button and the function status will be signalled
by the corresponding LED switching on or off.
Several functions (SUPER COOL, SUPER FREEZE, ICE
PARTY, I CARE) are incompatible with others
(HOLIDAY,...); remember that there is a pre-set order of
priority which will help you to use the product in the best
possible way.
When the Ice Party function has finished, press the ICE
PARTY button to stop the relevant LED from flashing. This
flashing indicates that the function is complete and that the
bottle should be removed from the freezer compartment.
Child Lock
To enable the Child Lock function, the ALARM button
must be pressed for 2 seconds; the button lock activation
is confirmed by a short beep and the text "LO" "CH"
appears on the refrigerator and freezer displays. This text
is then replaced by the refrigerator and freezer
temperatures set prior to when the child lock function was
enabled.
To deactivate the function, press the ALARM button or 2
seconds; deactivation will be confirmed by a short beep
and the text "CH" "OF" will appear on the refrigerator and
freezer displays for 1 second.