- ページ 5

ホブ Ariston NIO 844 DO B AUSのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Ariston NIO 844 DO B AUS 12 ページ。

ページを印刷する

Start-up and use

The glue applied on the gaskets leaves traces of

grease on the glass. Before using the appliance, we

recommend you remove these with a special non-

abrasive cleaning product. During the first few hours

of use there may be a smell of rubber which will

disappear very quickly.

A few seconds after the hob is connected to the

electricity supply, a buzzer will sound. The hob may

now be switched on.

Types of noise during normal hob operation:

Buzz:

• Buzz:

Buzz:

Buzz: due to the vibration of the metallic parts

that make up the induction element and the pot; it

is generated by the electromagnetic field required

for heating and increases as the power of the

induction element increases.

• Soft whistle:

Soft whistle:

Soft whistle: heard when the pot placed on the

heating zone is empty; the noise disappears once

food or water is placed into the pot.

• Crackle:

Crackle:

Crackle: produced by the vibration of materials

on the bottom of the pot due to the flow of

parasitic currents caused by electromagnetic

fields (induction); can be more or less intense

depending on the material making up the bottom

of the pot, and decreases as the pot dimensions

increase.

• Loud whistle:

Loud whistle:

Loud whistle: heard when two induction

elements of the same group function

simultaneously at maximum power and/or when

the booster function is set on the larger element

while the other is auto-adjusted. Noise is reduced

by decreasing the power level of the auto-

adjusted induction element; pot bottom layers

made of different kinds of materials are among

the main causes of this noise.

• Fan noise:

Fan noise:

Fan noise: a fan is necessary to ensure the hob

functions correctly and to safeguard the electronic

unit from possible overheating. The fan functions

at maximum power when the large induction

element is at maximum power or when the booster

function is on; in all other cases, it works at

average power depending on the temperature

detected. Furthermore, the fan may continue to

work even after switching the hob off, if the

temperature detected is high.

The types of noise listed above are due to induction

technology and are not necessarily operational

faults.

- - - - -

+ + + + +

If the

button is pressed for an extended

period of time, the display scrolls quickly though the

power levels and timer minutes.

Switching on the hob

To switch the hob on, press and hold the

for approximately one second.

Switching on the cooking zones

Each cooking zone is controlled using a selector

button

and a power adjustment device

consisting of power level selector buttons between

the values of 0 and 9.

• To begin operating a cooking zone, press the

corresponding control button and set the desired

power level using the power level selector buttons

between 0 and 9.

Switching off the cooking zones

To switch off a cooking zone, select it using the

corresponding selector button

• Press power level selector button 0: this

immediately returns the power setting to 0 and the

cooking zone switches off.

Booster function

The booster function for some of the cooking zones

may be used to shorten heating-up times. It may be

activated by pressing the

indicator light directly above the button will illuminate.

This function boosts the power to 2000 W or 3000 W,

depending on the size of the relevant cooking zone.

The booster stops automatically after 4 minutes. While

the booster for one of the cooking zones is active, the

corresponding front or rear cooking zone will operate at

a reduced power level (e.g. if the booster for the rear

left-hand hotplate has been activated, the power level

of the front left-hand hotplate will be reduced). For

further information, please refer to the Technical

description of the models .

Programming the cooking duration

! All the cooking zones may be programmed

simultaneously, for a duration between 1 and 99

minutes.

1. Select the cooking zone using the corresponding

selector button.

2. Adjust the power level of the cooking zone.

3. Press the

programming button. The indicator light

corresponding to the selected zone will start flashing.

button

and:

button. The

Booster