- ページ 13

洗濯機 Whirlpool 6760のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Whirlpool 6760 16 ページ。 6kg, 1000rpm, top loader washing machine, white awe 6760

Description of failure indications

Failure indication

lights up

"Water tap closed"

"Clean pump"

Description - Causes - Solutions

Appliance has no or insufficient water supply. The "Start(Pause)" light flashes.

Check whether:

• Water tap is fully open and water supply pressure is sufficient.

• Kinks are present in water inlet hose.

• Mesh filter of water supply hose is blocked (see "Care and Maintenance").

• Water hose is frozen up.

• Safety valve inspection window of your water supply hose is red (provided

your appliance has a water supply hose as shown on picture "A" - see

previous chapter "Care and Maintenance"); replace the hose by a new one

available through our After-Sales Service or your specialist dealer.

After problem has been removed, restart programme by pressing "Start

(Pause)". If the fault occurs again, contact our After-Sales Service (see next

chapter).

Waste water is not pumped out. The appliance stops in the corresponding

programme step; unplug it and check whether:

• Kinks are present in the drain hose.

• Filter or pump is blocked (see chapter "Cleaning the Filter/ Draining Residual

Water"; make sure the water has cooled before draining the

appliance).

• The drain hose is frozen up.

After problem has been removed, select and start "Drain" programme or push

"Reset" button for at least 3 seconds; afterwards restart desired programme.

If the fault occurs again, contact our After-Sales-Service (see next chapter).

GB 13