- ページ 10

洗濯機 Whirlpool 8003437208836のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Whirlpool 8003437208836 20 ページ。

ページを印刷する

5 . Add detergent

Pull out the detergent dispenser and add

detergent (and additives/softener) into the relative

compartments as described in section "DETERGENT

DISPENSER" . Observe the dosing recommendations

on the detergent pack .

Correct dosing of detergent / additives is important, because:

• it optimizes the cleaning result

• it avoids irritating residues of surplus detergent in your

laundry

• it saves money by avoiding waste of surplus detergent

• it protects the washing machine by avoiding

calcification of components

• it respects the environment by avoiding unnecessary

environmental burden .

6 . Delaying the start of a programme

• To set a programme to start at a later time, see the

section "OPTIONS/ START DELAY"

7 . Start programme

• Press the "Start/Pause"

illuminates, the door locks and the "Door locked"

indicator lights up .

• To avoid overflow, do not open the detergent

dispenser during a running programme anymore .

• The remaining programme duration can vary . Factors

like unbalance in the wash load, or foam formation, can

have an effect on the programme duration .

8 . Change the settings of a running programme, if

needed

You can still change the settings while a programme is

running . The changes will be applied, provided the respective

programme phase has not finished yet .

To change the settings of a running programme:

• Press "Start/Pause"

on pause .

• Change your settings .

• Press "Start/Pause"

programme .

If you have changed the programme, do not add detergent

for the new programme .

To prevent that a running programme is changed by accident

(for instance by children), use the "Key lock"

"FUNCTIONS") .

Pause a running programme and open the door, if

needed

• Press "Start/Pause"

• Provided water level or temperature is not too high,

the "Door locked"

open the door, for example to add more laundry, or to

remove laundry which was loaded by mistake .

• Press "Start/Pause"

programme .

9 . Cancelling a running programme, if needed

• Press and hold the "ON/OFF"

washing machine stops .

• If the water level and temperature are low enough, the

door unlocks and may be opened .

• The door remains locked if there is water in the drum .

To unlock the door, switch the washing machine on,

select the "Spin & Drain" programme and turn the spin

option off by setting the spin speed to "0" .

• The water is emptied and the door unlocks at the end

of the programme .

. The relative indicator lamp

to put the running programme

again to continue the

(see section

to pause a running programme .

indicator light turns off . You can

to proceed with the

button until the

10 . Switch off the washing machine after programme End

• At the end of the cycle, the message "END" is shown on

the display .

• The door can only be opened when the symbol "Door

locked"

light turns off .

• Check that the "Door locked"

open the door and take out the laundry .

• Press "ON/OFF"

To save energy, if the washing machine is not switched

off manually with the button, it turns off automatically

approximately 30 minutes after the end of the programme .

Leave the door ajar to let the interior of the washing

machine to dry .

User manual

indicator is off, then

to switch the washing machine off .