- ページ 13

洗濯機 Whirlpool 8182042のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Whirlpool 8182042 44 ページ。 Front-loading automatic washer

ページを印刷する

Status Lights

These lights show which portion of the cycle the washer is

operating. They also indicate when you can add an additional

item to the wash cycle and when the controls are locked.

Adding items

You can add items to the washer after the cycle has started for

Sanitary, Whitest Whites, Heavy Duty, Normal and Quick Wash, if

the ADD A GARMENT status light is glowing.

To add items

1. Select PAUSE/CANCEL. The washer door unlocks, and items

can be added.

2. To continue the cycle, close the door and select HOLD TO

START (for approximately 1 second).

Cycle Complete

The cycle complete light stays on for 5 minutes after the cycle is

complete and then the washer shuts off.

Locking controls

The Control Lock prevents unintended use of the washer. You

can also use the control lock feature to prevent unintended cycle

or option changes during a cycle. When CONTROL LOCKED is

lit, all buttons are disabled except for PAUSE/CANCEL and

START. You can lock the controls while the washer is operating.

To lock the controls

Select and hold END OF CYCLE SIGNAL for 3 seconds.

The CONTROL LOCKED status light glows.

To unlock the controls

Select and hold END OF CYCLE SIGNAL for 3 seconds until the

CONTROL LOCKED Status light turns off.

Estimated time remaining

The cycle time varies automatically based on your water

pressure, water temperature, detergent and clothes load. The

cycle time will be extended if oversudsing occurs or the load is

unbalanced.

Cycles can be selected by turning the Cycle control knob to the

desired cycle. Each cycle is designed for different types of fabric

and soil levels.

Each cycle has a preset Soil Level (cycle time), Water

Temperature and Spin Speed, and may have preset options.

The preset settings provide the recommended fabric care for

the selected cycle.

The preset settings can be changed anytime before HOLD TO

START is pressed. Not all options and modifiers are available

with all cycles. (To change settings after the cycle has started,

press PAUSE/CANCEL, then select the desired settings.

Press HOLD TO START to continue the cycle.)

Sanitary

Use this cycle to clean heavily soiled, colorfast fabrics. This

cycle combines a super hot water temperature and fast speed

tumbling to help ensure the removal of heavy soils and stains.

It is recommended that you set your hot water heater to 120ºF

(49ºC) to ensure proper performance during this cycle. The

Sanitary cycle also helps eliminate 99.999% of 3 common

infectious bacteria, even when no bleach is used. Extra high

speed spin helps shorten drying time.

Whitest Whites

This cycle is especially designed for cleaning loads of soiled

white fabrics with the addition of bleach. Hot washing

temperatures assure optimal bleach activity. An additional rinse

provides optimal rinse performance to avoid chlorine residues on

your laundry. This cycle combines fast speed tumbling, longer

wash time, and extra high-speed spin to shorten drying time.

Heavy Duty

Use this cycle to wash loads of sturdy, colorfast fabrics and

normally soiled garments. This cycle combines fast speed

tumbling, longer wash time, and extra high speed spin to shorten

drying times. If the water temperature is lower than needed for

this cycle, the heater will warm the water to the optimum

temperature.

NOTE: Use the Heavy Duty cycle for optimal removal of organic

soils such as blood.