ページを印刷するGather the required tools and parts before starting installation.
The parts supplied are in the washer basket.
Tools needed for connecting the drain hose and water
inlet hoses:
Pliers that open to
3.95 cm (1⁹⁄₁₆")
Parts supplied:
A
A. Drain hose form
B. Water inlet hoses (2)
C. Flat water inlet hose washers (4)
Tools needed for securing the drain hose and leveling
the washer:
Adjustable or open end
wrench 14 mm (⁹⁄₁₆")
Level
Parts supplied:
A
A. Beaded tie strap
B. Front leveling feet with nuts (2)
2
INSTALLATION REQUIREMENTS
Tools and Parts
Flashlight (optional)
C
B
Wood block
Ruler or measuring tape
B
Alternate Parts
Your installation may require additional parts. For ordering
information, please refer to the toll-free phone numbers on the
front page of the Washer User Instructions.
If You Have:
You Will Need to Buy:
Laundry tub or
Sump pump system (if not already
standpipe taller
available)
than 2.4 m (96")
2.5 cm (1")
3.2 cm (1¹⁄₄") diameter to 2.5 cm (1")
diameter
diameter standpipe adapter,
standpipe
Part Number 280130
Overhead sewer
Standard 76 L (20 gal.) 99 cm (39") tall
drain tub or utility sink, sump pump and
connectors (available from local
plumbing suppliers)
Floor drain
Siphon break, Part Number 280129;
additional drain hose,
Part Number 3357090
Water faucets
2 longer water fill hoses:
beyond reach of fill
1.8 m (6 ft) Part Number 76314,
hoses
3.0 m (10 ft) Part Number 350008
Drain hose too
Drain hose kit, Part Number 280131
short
Lint clogged drain
Drain protector, Part Number 367031