- ページ 29
洗濯機 Whirlpool 8TWFW5620HW0のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Whirlpool 8TWFW5620HW0 32 ページ。 Front-loading automatic washer
ページを印刷する
TROUBLESHOOTING
First try the solutions suggested here or visit our website at www.whirlpool.com.tw.
If you experience
Washer Not Performing As Expected (cont.)
Not cleaning or
removing stains
(cont.)
Odors
Fabric damage
Possible Causes
Not using correct cycle for fabric type.
Not using dispensers.
Dispense cartridge is empty.
Detergent dispenser is not securely
in place.
Not washing like colors together.
Not enough detergent used,
or hard water.
Monthly maintenance not done as
recommended.
Not using HE detergent or using too
much HE detergent.
Door not left open after use.
Sharp items were in pockets during
wash cycle.
Strings and straps could have tangled.
Items may have been damaged
before washing.
Fabric damage can occur if washer
is tightly packed.
Fabric damage can occur if washer
door is closed on an item, trapping
it between the door window and the
rubber seal.
Liquid chlorine bleach may have been
added incorrectly.
Use a higher soil level setting and warmer wash temperature
to improve cleaning.
If using Quick Wash cycle, wash only a few items.
Use Whites and Heavy Duty cycles for tough cleaning.
Add an extra rinse for heavily soiled loads.
Use dispensers to avoid chlorine bleach and fabric softener
staining.
Load dispensers before starting a cycle.
On some models: Make sure that the Load & Go bulk dispenser
liquid detergent dispenser is not empty.
Avoid overfilling.
Do not add products other than those specified directly to load.
Fill dispense cartridge to the "MAX" line with HE liquid detergent.
Pull out the dispenser, fill with detergent, and slide it back
in place.
Wash like colors together and remove promptly after the cycle
is complete to avoid dye transfer.
Use more detergent for washing heavy soils in cold or
hard water.
Run the Clean Washer with affresh cycle monthly or every
30 wash cycles. See "Washer Care" in the "Washer
Maintenance" section.
Unload washer as soon as cycle is complete. Use the
FanFresh option if load cannot be removed immediately
after the wash is complete.
Use only HE detergent. Be sure to measure correctly. Always
follow the manufacturer's directions.
See the "Washer Care" section.
This washer has a tight seal to avoid water leaks. To avoid odors,
leave the door open to allow the washer to dry between uses.
Empty pockets, zip zippers, and snap or hook fasteners before
washing to avoid snags and tears.
Tie all strings and straps before starting wash load.
Mend rips and broken threads in seams before washing.
Avoid tightly packing the washer. Load with dry items only.
Use cycle designed for the fabrics being washed.
Add only one or two garments after washer has started.
Do not overfill the washer.
Push wash load fully into the washer.
Do not pour liquid chlorine bleach directly onto load. Wipe up
bleach spills.
Undiluted bleach will damage fabrics. Do not use more than
recommended by manufacturer.
Solution