- ページ 17

洗濯機 Whirlpool AWE 7515のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Whirlpool AWE 7515 19 ページ。

IFU-TL HR GB.fm Page 17 Friday, November 7, 2008 2:30 PM

Black process 45.0° 100.0 LPI

Downloaded From WashingMachine-Manual.com Manuals

Adjust the feet

Install the washing machine on a level surface, near to

electrical, water and drain connections.

If the floor is uneven, adjust the feet (do not insert pieces of

wood, cardboard etc. under the feet):

1. Loosen the locknut using the wrench provided.

2. Adjust the height of the feet by hand.

3. Retighten the locknut by turning it anti-clockwise.

Make sure that the feet are resting correctly on the

floor and that the washing machine is perfectly level

and stable (use a spirit level).

The washing machine can be installed in an area 40 cm wide

and 63 cm deep.

Note: if you install the machine on thick carpet, adjust the

feet to ensure that there is sufficient space under the

machine for the air to circulate.

Connect the water inlet hose

1. Carefully screw the water inlet hose "A" (see pictures 1,

2 or 3, depending on the model) onto the tap by hand.

2. Make sure there are no kinks in the hose.

3. Check water-tightness of tap and washing machine

connections by turning the tap completely on.

It the hose is too short, replace it with a suitable hose

available through our After-Sales Service or your specialist

retailer.

Periodically check the hose for brittleness and cracks.

Replace it if necessary by a new hose available through our

After-Sales Service or your specialist retailer.

The washing machine can be connected without a non-

return valve.

GB 17