- ページ 10

洗濯機 Whirlpool AWG 5122CのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Whirlpool AWG 5122C 32 ページ。 Full electronic washing machine

FUNCTION BUTTONS

Intensive rinse

You can have one more rinsing done in addition to the rinses

which your machine has made in all washing programs by

using this function.

Start delay

The timer function enables you to set your machine to start

its wash operation with delay. Depending on the delay time

you wish the programme to start at press the function button

until the desired delay timer lamp (1h/3h/5h/7h) lights up on

the control panel. The lamp above the function button will

flash. Start the programme by pressing the start/hold button.

Rinse hold

This function is recommended to be used when the clothes

cannot be taken immediately after the end of the

program.This will prevent occurrence of wrinkles. When this

button is pressed, the last rinsing water is not drained. For

the program to continue from the start pause, repress the

start pause button.

WARNING!

If you have forgotten to use an additional function and the machine has

started the wash operation press the button of the additional function

you wish to select; if the indicator lamp above it keeps lighting the

additional function you selected will become active. If the lamp stays lit

for a certain while and then goes out the additional function you

selected will not become active.

NOTE: Our products contain electronic cards and touchscreen buttons.

Lightly pressing on the buttons will suffice to activate the

functions.