- ページ 8
洗濯機 Whirlpool Cabrio WTW5600XW3のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Whirlpool Cabrio WTW5600XW3 36 ページ。 Top-loading high efficiency low-water washer
ページを印刷する8. Select
cycle
NORMAL
QUICKWASH
E(O ,J(): _A
DELICATE
CASUAL
BULKY
ITEMS
CLEAI_
tEAVY
WASHEI_
DUTY
with
affre_
SOAK
_INSE & SPIN
DRAIN & SPIN
Turn cycle knob to choose your wash cycle. For more
information, see "Control Panel."
9, Select
cycle settings
I Hot
l Extra Heavy
Warm
l Heavy
IHigh
_i
IM_II
um
l LNoWspin
Temp
Soil
Spin
Level
Speed
Once you select a cycle, the default settings for that cycle
will be lit. Press the cycle settings buttons to change the
Temperature, Soil Level, and Spin Speed, if desired.
NOTE: Always read and follow fabric care label instructions
to avoid damage to your garments.
Wash Temp
energy. This will be cooler than
Durable garments
your hot water heater setting.
Heavy soils
Warm
Some cold water will be added,
so this will be cooler than what
Bright colors
Moderate to light soils
0, select
cycle options
CD
CD
Fabric
Extra
Softener
Rinse
Select any other cycle options you may wish to add, if not
previously set. Some cycles will automatically
add certain
options such as Extra Rinse. These can be turned off, if
desired.
NOTE: Not all options are available with all cycles.
1 1. Press START/Pause/Unlock
to begin wash cycle
START
Pause/Unlock
Press the START/Pause/Unlock
button to start the wash
cycle. Filling is delayed for several minutes while load balance
is sensed.When the cycle has finished, the DONE indicator
will light. Promptly remove garments after cycle has
completed to avoid odor, reduce wrinkling, and rusting of
metal hooks, zippers, and snaps.
Unlocking
the lid to add garments
If you need to open the lid to add 1 or 2 missed garments:
Press START/Pause/Unlock;
the lid will unlock once
the washer movement has stopped. This may take several
minutes if the load was spinning at high speed. Then close
the lid and press START/Pause/Unlock
again to restart
the cycle.
If lid is left open for more than 10 minutes, water will pump
out.
Delay in water fill
Filling is delayed for 2 to 3 minutes to check for load
unbalance. You will hear the hum of the spin prior to filling.
This is normal operation.
8