- ページ 2

洗濯機 Whirlpool Cabrio,- WTW6300WのPDF 寸法マニュアルをオンラインで閲覧またはダウンロードできます。Whirlpool Cabrio,- WTW6300W 2 ページ。 Whirlpool washer installation instructions
Whirlpool Cabrio,- WTW6300W にも：取扱説明書 (40 ページ), インストレーション情報 (1 ページ), インストレーション情報 (1 ページ), 取付説明書 (20 ページ)

ページを印刷する

ELECTRICAL REQUIREMENTS

A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical supply is required. A time-delay fuse or circuit breaker is recommended. It is

recommended that a separate circuit serving only this appliance be provided.

DRAIN SYSTEM

The washer can be installed using the standpipe drain system (floor or wall), the laundry tub drain system, or the floor drain system.

Select the drain hose installation method you need.

Standpipe drain system - wall or floor (views A & B)

The standpipe drain requires a minimum diameter standpipe

of 2" (51 mm). The minimum carry-away capacity can be not

less than 17 gal. (64 L) per minute. A 2" (51 mm) diameter to

1" (25 mm) diameter standpipe adapter kit is available. See

"Tools and Parts".

The top of the standpipe must be at least 39" (990 mm) high

and no higher than 96" (2.4 m) from the bottom of the washer.

Laundry tub drain system (view C)

The laundry tub needs a minimum 20 gal. (76 L) capacity. The

top of the landry tub must be at least 39" (990 mm) above the

floor and no higher than 96" (2.4 m) from the bottom of the

washer.

Floor draim system (view D)

The floor drain system requires a siphon break that may be

purchased separately. The siphone break must be a minimum

of 28" (710 mm) from the bottom of the washer. Additional hoses

might be needed.

(990 mm)

Because Whirlpool Corporation policy includes a continuous commitment to improve

our products, we reserve the right to change materials and specifications without notice.

39"

(990 mm)

28"

39"

(710 mm)

Dimensions are for planning purposes only. For complete details, see Installation

Instructions packed with product. Specifications subject to change without notice.