- ページ 4

ホブ Ariston PK 755 D GH XのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Ariston PK 755 D GH X 9 ページ。

ページを印刷する

Connecting a flexible jointless stainless steel pipe to a

threaded attachment

Suitable for connection with a flexible hose assembly. The flexible hose

assembly must be certified to AS/NZS 1869 class B or D, be of

appropriate internal diameter for the total gas consumption, be kept as

short as possible (not exceeding 1200mm), must not be in contact with

the floor or any hot or sharp surfaces. The hose assembly must not be

subject to strain, abrasion, kinking or deformation.

E ns u r e pipe s do not touch any moving parts and

is not compressed.

! Only use pipes and seals that comply with current

national regulations.

Burner and nozzle specifications

Table 1

Burner

Fast (R)

Semi Fast (S)

Auxiliary (A)

Test point pressure

P lace the supplied duplicate data plate to a suitable adjacent surface or within the instruction manual for future reference.

Burner

Gas Consumption Injector

(mm)

(MJ/h)

Nomin al

157

7 . 5

132

5.0

110

2.5

1.0 kPa with both Semi Fast

burners operating at high

Checking the tightness of the connection

! When the installation process is complete, check the

pipe fittings for leaks using a soapy solution. Never use a

flame.

Operation of the appliance must be tested by the installer before leaving.

Check all burner flames are blue in colour, stable and completely ignite

at both high and low flame settings with no appreciable yellow tipping,

carbon deposition, lifting, floating, lighting back or objectionable odour.

Test burners individually and in combination.

For other minor adjustments or if the appliance does not

perfrom correctly; contact Arisit Pty Ltd 1300 762 219

Natural Gas

Adjusting the burner's

(1.0 kPa)

(Primary air)

(mm)

125

100

(mm)

4.7

2.6

2 .0