- ページ 5

ドライヤー Ariston A35VのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Ariston A35V 48 ページ。 Tumble dryer

ページを印刷する

Features - Get to know the main parts of your dryer

See "The Controls"

Model and

FLUFF FILTER

serial numbers

Clean after

each use

Rating plate

Caution

Hot

Rear venting with hose

NOTE: if your dryer is new wipe out

the inside of the drum before you first

use it to remove any dust which may

have accumulated during transit.

Drum

Air intake

grille

NOTE: When the

dryer is in use,

avoid touching the

back of the machine

as it may be hot.

Vent hose

fitted here

Where to put and vent your dryer

Your Tumble Dryer should NOT be located adjacent to a gas hob

cooker, heater, or eye level grill as flames from the burners could

cause damage to your machine. When the dryer is fitted under a

work surface allow space for air to enter the rear grille, 10mm above

the dryer minimum.

DO NOT use 2-way adaptors or extension leads.

Ventilation

The Dryer dries your washing by drawing in air that is cool, clean

and relatively dry, heating it and then blowing it through the clothes

as they are gently tumbled. The moisture laden air is then blown out

at the back of the dr yer through the vent hose which is

recommended for optimum performance.

When operating the dryer, there has to be adequate ventilation to

avoid the back flow of gases into the room from appliances burning

other fuels, including open fires.

Mobile Venting

A vent hose must always be fitted when the dryer is used in

conjunction with Mobile Venting.

The hose must be fitted securely into the back of the dryer (see

diagram on previous page). If possible, it is always best to connect

the hose to a permanent outlet close to the dryer (see instructions

below).

Ensure that the end of the hose is not directed towards the air

intake grille at the rear of the dryer.

If permanent installation is not possible, the dryer will work just as

well with the hose passed through a partly-opened window.

NOTE: The vent hose should not exceed 2.4 metres in length

and should be kept free of any possible accumulation of fluff,

lint (and water) by frequently shaking it out. Always ensure that

the hose is not squashed.

Fitting the Vent

See diagram on previous page.

Hose Kit