- ページ 17

冷蔵庫 Whirlpool 2212539のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Whirlpool 2212539 44 ページ。 Top-mount refrigerator

ページを印刷する

CARING FOR YOUR

REFRIGERATOR

Cleaning Your Refrigerator

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion,

or fire.

Both the refrigerator and freezer sections defrost automatically.

However, clean both sections about once a month to prevent

odors from building up. Wipe up spills immediately.

To clean your refrigerator:

1. Unplug refrigerator or disconnect power.

2. Remove all removable parts from inside, such as shelves,

crispers, etc.

3. Hand wash, rinse, and dry removable parts and interior

surfaces thoroughly. Use a clean sponge or soft cloth and a

mild detergent in warm water.

Do not use abrasive or harsh cleaners such as window

sprays, scouring cleansers, flammable fluids, cleaning

waxes, concentrated detergents, bleaches or cleansers

containing petroleum products on plastic parts, interior

and door liners or gaskets.

Do not use paper towels, scouring pads, or other harsh

cleaning tools. These can scratch or damage materials.

To help remove odors, you can wash interior walls with a

mixture of warm water and baking soda (2 tbs to 1 qt. [26

g to .95 L] of water).

4. Wash stainless steel and painted metal exteriors with a clean

sponge or soft cloth and a mild detergent in warm water. Do

not use abrasive or harsh cleaners. Dry thoroughly with a soft

cloth.

For additional protection against damage to painted metal

exteriors, apply appliance wax (or auto paste wax) with a

clean, soft cloth. Do not wax plastic parts.

5. Clean the condenser coils regularly. Coils may need to be

cleaned as often as every other month. This may help save

energy.

Style 1 - Condenser coils behind base grille:

Remove the base grille (see the "Base Grille" section).

Use a vacuum with an extended attachment to clean the

condenser coils when they are dusty or dirty.

Replace the base grille when finished.

Style 2 - Condenser coils in back of the refrigerator:

Pull refrigerator out away from the wall (see the

"Unpacking Your Refrigerator" section).

Vacuum coils when they are dusty or dirty.

Roll refrigerator back into place. Make sure to leave 1 in.

(2.5 cm) between the cabinet back and the wall.

Check to see if the refrigerator is level.

6. Plug in refrigerator or reconnect power.

Changing the Light Bulbs

NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to

replace the bulb with one of the same size, shape, and wattage.

To change the refrigerator light:

1. Unplug refrigerator or disconnect power.

2. Reach behind the Control Panel and unscrew the bulb.

3. Replace the bulb with an appliance bulb of the same wattage.

4. Plug in refrigerator or reconnect power.

To change freezer light:

(on some models)

1. Unplug refrigerator or disconnect power.

2. Reach behind light shield to remove bulb.

3. Replace bulb with a 40-watt appliance bulb.

4. Plug in refrigerator or reconnect power.