- ページ 12
冷蔵庫 Whirlpool 3ET22DKのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Whirlpool 3ET22DK 20 ページ。 No-frost refrigerator-freezers
Whirlpool 3ET22DK にも： 取扱説明書 (16 ページ), 取扱説明書 (26 ページ)
ページを印刷する
Changing
the light
bulbs
Electrical
Shock
Hazard
Before removing a light bulb, either unplug
the refrigerator or disconnect the electricity
leading to the refrigerator at the main
power supply.
Failure to do so could resuft in electrical
shock or personal injury.
To change
the refrigerator
light:
1.
Disconnect refrigerator from power supply.
2. Reach behind the Control Panel to remove
bulb.
3. Replace with a 40-watt appliance
bulb.
4. Reconnect refrigerator to power supply.
To change
freezer
light
(3ET22DK):
1.
Disconnect refrigerator from power supply.
2. Grasp the top and bottom of the light shield.
3. Squeeze and pull light shield out.
4. Replace with a 25watt
appliance
bulb.
5. Snap light shield into place.
6. Reconnect refrigerator to power supply.
NOTE:
Not all commercial
appliance
bulbs will fit
your refrigerator.
Be sure to replace a bulb with
one of the same size and shape.
Removing
the base g
To remove
the grille:
l_
Open refrigerator door.
2. Pull base grille forward to release the support
tabs from the metal clips.
3.
Do not remove
Tech
Sheet
fastened behind
the grille.
To replace
the grille:
1.
Line up grille support tabs with metal clips.
2. Push firmly to snap into place.
3. Close refrigerator door.
See cleaning instructions for defrost pan and
condenser coils on page I 5.
le
Condenser
coils
12