- ページ 13

冷蔵庫 Whirlpool 445L DlxのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Whirlpool 445L Dlx 27 ページ。 Top mount no frost refrigerator

1. Defrost Sensor mounted on the Evaporator tube.

2. Removing/Replacing the Defrost Sensor

Defrost Temperature Sensor – NTC

It's located at the freezer compartment, along with the Evaporator. The Defrost Sensor is responsible

for sending signals to the electronic control, which will command the ending of the defrost, turning off

the Defrost Heater,

This does a similar function to the well-known Defrost Bimetal

Never change the position of such Sensors, as their functional characteristics can be

modified. This sensor also informs the temperature conditions of the Evaporator when

the product is activated (plugged in electricity) indicating to the Electronic Control the

correct start up to be followed, for instance, manufacturing ,default or the previous

programming done by the user, compressor delay , etc.

These Sensors (refrigerator & Defrost) Are Compatible with Each Other, but

Are not compatible with the Sensors of the previous Model (SYMPHONY)

NEVER replace these Sensors with the Sensor Kit used in the Symphony model.

In the need of replacing one of the Temperature Sensors, Replace the full RC/FC Sensor harness (In

these model FC Sensor harness is replaceable). Directly replace the relevant RC or FC Sensor

harness. Do not try to repair the harness for the faulty Thermistor.

IMPORTANT

WARNING