ページを印刷するDryer Description
The front
Control Panel
Model & Serial
numbers
Control panel
Programs Guide
The ON/OFF button/light
and this button is pressed, the dryer is turned off.
Press again, the dryer restarts. The light signals that
your dryer is in use or ready to select a program.
The Programs Guide allows you to consult a user
friendly table of the available programs.
The PROGRAMS knob sets the program: rotate it until
the indicator is pointing to the program you want to select
(see Start and Programs).
The OPTION buttons/lights select available options for
your selected program. The lights indicate that the
option has been selected. If an option is not available
the buzzer (alert) will beep three times (see Start and
Programs).
The START/PAUSE button/light
program. When you press this button there will be one
beep and the progress lights will flash to confirm the
action. When a program is running, holding this button
Drum
Filter
PROGRAMS
Knob
ON/OFF
Button & Light
: If the dryer is running
starts a selected
The back
Air Intake Vent
Caution: Hot!
Indicator
DISPLAY
CHILD LOCK
Button & Light
START/PAUSE
Button & Light
in pauses the program and stops the dryer.
The light is green when the program is running, flashing
amber if the program has been paused or flashing
green if on standby waiting to start a program (see Start
and Programs).
The CHILD LOCK button/light: Press and hold this
button after selecting your program and any options,
this prevents the program settings from being
changed. When the light is lit the other buttons and
the program knob are disabled. Hold the button to
cancel and the light will go out.
The Progress lights show you the status of the
program. As each stage of the program starts the
corresponding light turns on.
The Clean Filter light gives you a reminder before
every program that it is essential to clean the filter
every time the dryer is used (see Maintenance and Care).
OPTION
Buttons & Lights
Clean Filter
Light
Progress
Lights
EN
5