ページを印刷する
ASSEMBLY INSTRUCTIONS-FLR MODELS
Photo 11
6. For FLR (floor) models, open the plastic base
and place the shelter in the base (Photo 11). All
four corners of the shelter fit inside of the base
(Photo 12).
Attach the four male buckles affixed to the inside
of the tent to the female buckles attached to the
floor and adjust tension (Photo 13).
In windy weather, anchoring one or more side
hubs to ice anchors mounted in the ice several
feet from the shelter may be needed.
Photo 12
Straps & Buckles
Photo 13
Page 6