ページを印刷する
Part Name
Motor Supply Pump
1. Remove Tank from water tube.
4. Release screws at Water Supply
Pump.
7.
Pull out housing of Water Supply Pump.
10. After replacing Motor Supply Pump, reverse the steps above.
Ref. No. : SM77-05-058-0
Operating Procedure
2. Release screws at Motor Cover.
5. Pull out the housing from inner Door
Liner.
8. Cut cable tie from Dispenser Tube A
3. Take Motor Cover from Door Liner.
6. Use the screws driver to unlock the
housing connectcr of Water Supply Pump.
9. Pull out Dispenser Tube A from
Dispenser Tube A
Printed : Nov'2005
Page : 19