- ページ 3

冷蔵庫 Whirlpool WSR57R18DMのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Whirlpool WSR57R18DM 24 ページ。
Whirlpool WSR57R18DM にも：ユーザーマニュアル (28 ページ)

ページを印刷する

Clean Before Using

After you remove all of the packaging materials, clean the inside of your

refrigerator before using it. See the cleaning instructions in "Caring For

Your Refrigerator."

Important information to know about glass shelves

and covers:

Do not clean glass shelves or covers with warm water when

they are cold. Shelves and covers may break if exposed to

sudden temperature changes or impact, such as bumping.

Tempered glass is designed to shatter into many small,

pebble-size pieces. This is normal. Glass shelves and covers

are heavy. Use both hands when removing them to avoid

dropping.

Location Requirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

Ventilation and Clearance

Keep flammable materials and vapors, such as gasoline, away from

refrigerator.

Do not cover the refrigerator with items such as blankets, sheets,

tablecloths, etc. This reduces air circulation.

Allow at least 1" (2.5 cm) between the back of the refrigerator and

the wall. If the refrigerator is to be next to a fixed wall, leave extra

space on the hinge side so the door can open wider.

Temperature

Your refrigerator operates most efficiently when located in an area

where the temperature will not fall below 40°F (5°C). Place your

refrigerator in a location where the temperature will not fall below this

recommended temperature.

Upon Moving to Final Location

NOTE: This refrigerator may be installed side by side with another

freezer or refrigerator. Allow for a 1" (2.54 cm) space behind the

refrigerator and a ¹⁄₄" (6.4 mm) clearance between the appliances.

Electrical Requirements

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to

make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only, 15- or 20-amp fused, grounded electrical

supply is required. It is recommended that a separate circuit serving

only your refrigerator be provided. Use an outlet that cannot be turned

off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing

a light bulb, press and hold TEMP SETTING for 3 seconds to turn off

cooling, and then disconnect the refrigerator from the electrical source.

WARNING