ページを印刷する1. INSTALL TWO COLLARS TO EACH HOOP POLE AS SHOWN
COMPLETED HOOP POLE ASSEMBLY AT THIS POINT SHOULD MOVE
FREELY AND LOOK LIKE THE FOLLOWING PICTURE.
WIRE FROM LIGHT STICK SHOULD BE LOCATED ON SAME SIDE
AS BATTERY HOLDER
BATTERY
BRACKET
HOLDER.
DO NOT INSTALL FRONT
HOOP POLE AT THIS TIME
STEP-7
ALIGN COLLAR WITH
THE HOLES IN HOOP
AS SHOWN
COLLAR TAB IS PLACED INSIDE OF TUBE
2. SLIDE HOOP POLES OVER
TUBE EXTENSIONS AND
LOCK INTO PLACE WITH
COLLARS.
INSTALL ROPE
AND TIE OFF ENDS
INSIDE OF BASE.