- ページ 7

ドライヤー Whirlpool WGD94HEXLのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Whirlpool WGD94HEXL 40 ページ。 Electronic dryer
Whirlpool WGD94HEXL にも：取扱説明書 (8 ページ)

ページを印刷する

LED DISPLAY AND SETTINGS BUTTONS

When you select a cycle, its default settings will light

up and the Estimated Time Remaining (for Auto Cycles)

or actual time remaining (for Manual Cycles) will be

displayed.

Use the buttons along the bottom of the display to adjust

settings. See Cycle Guide for available settings on each

cycle. Not all settings are available with all cycles.

Cycle Status Lights

The indicator bar at the top of the display will let you

know what stage the drying cycle is in process.

For more information on each stage, see "Cycle Status

Indicators".

Temperature

When using Manual Cycles or Enhanced Touch Up, you

may select a dry temperature based on the type of load

you are drying. Use the warmest setting safe for the

garments in the load. Follow garment label instructions.

NOTE: Eco Auto Cycles use a preset temperature that

is not adjustable.

Dryness Level

You may adjust the Dryness Level on Eco Auto Cycles,

if desired.

NOTE: Dryness Level is for use with Eco Auto

Cycles only.

Garment # (on some models)

Use this button with the Quick Refresh cycle to select

the number of garments being refreshed. When START

is pressed, the cycle time will be displayed. See Cycle

Guide for more information.

Cycle Signal

Use this button to turn the buzzer indicating the

end of a drying cycle on or off, or to adjust the

volume of the buzzer.

NOTE: You may also turn off the tones that sound

when a button is pressed. Press and hold the

EcoBoost button for about one second to turn

button sounds on or off.

OPTION BUTTONS

Use these buttons to select available options for your

dryer. Not all cycles and options are available on all

models.

EcoBoost

Press to activate the EcoBoost option. The EcoBoost

option allows you to increase your energy savings by

using a slightly lower heat level. This may increase dry

times somewhat.

NOTE: Press and hold the EcoBoost button for about

one second to turn button sounds on or off.

Damp Dry Signal

Press to hear the Damp Dry Signal when the load is

damp, but not completely dry. This will allow you to

take clothes out of the load that do not need to dry

completely. This option is available on Heavy Duty,

Normal, Jeans, Bulky Items, Casual, and Delicate

cycles.

Drum Light

Press to turn the LED drum light on or off. The light

will also turn on when the door is open, and turn off

automatically after about 5 minutes.

Control Lock

Use this button to lock the controls of the dryer

and avoid an accidental change in cycle options or

preferences during a drying cycle.

WRINKLE SHIELD/WRINKLE SHIELD with Steam

(on some models)

If you will be unable to remove a load immediately,

press Wrinkle Shield to add up to 120 minutes of periodic

tumbling to help reduce wrinkling. On models with Wrinkle

Shield with Steam, a short steam cycle is added after 60

minutes to help smooth out wrinkles.

NOTE: On models with Wrinkle Shield with Steam. you

may turn off Steam by pressing and holding the Wrinkle

Shield button until - St appears in the display. The dryer

will remember this setting for future loads. To turn Steam

back on, press and hold the Wrinkle Shield button again

for several seconds.

STATIC REDUCE (on some models)

Press to add the Static Reduce option to select Auto

cycles. The dryer will automatically tumble, pause, and

introduce a small amount of moisture into the load to help

reduce static. This option adds approximately 8 minutes

to the total cycle time.