- ページ 7

ドライヤー Whirlpool 3RAWZ481EのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Whirlpool 3RAWZ481E 24 ページ。 Electric and gas dryer
Whirlpool 3RAWZ481E にも：取扱説明書 (28 ページ), 取付説明書 (21 ページ)

ページを印刷する

2. Turn the Cycle Control knob to the recommended cycle for

the type of load being dried.

3. Select a temperature setting with the Temperature selector.

The cycle descriptions include temperature setting

suggestions.

4. (OPTIONAL) Select the End of Cycle Signal if desired. The

signal is helpful when drying permanent press or synthetics.

Promptly remove these items from the dryer at the end of the

cycle to prevent wrinkles.

5. Push the Start button. Your gas dryer has an electronic

ignition system for the burner which is fully automatic; no

action is needed by the user (there is no pilot light).

NOTE: Your dryer stops automatically when a cycle ends.

Stopping and Restarting

You can stop your dryer any time during a cycle.

To stop your dryer

Open the dryer door or turn the Cycle Control knob to an Off

position.

NOTE: The Cycle Control knob should point to an Off area when

the dryer is not in use.

To restart your dryer

1. Close the door.

2. Select a new cycle and temperature (if desired).

3. Push the Start button.

Load clothes loosely into the dryer. Do not pack the dryer. Allow

space for clothes to tumble freely. The following chart shows

examples of balanced loads that would allow for proper tumbling.

Heavy work

4 pair of trousers, 4 pair of jeans, 2

clothes

sweatshirts, 2 sweatpants, 4 shirts

Delicates

3 blouses, 1 robe, 4 slips,

8 undergarments, 2 sets of sleepwear,

1 child's outfit

Towels

10 bath towels, 10 hand towels,

14 washcloths, 1 bath mat

Mixed Load

3 sheets (1 king, 2 twin), 4 pillowcases,

9 T-shirts, 9 pair of shorts, 3 blouses

10 handkerchiefs, 3 shirts

Drying, Cycle, and Temperature Tips

Select the correct cycle and temperature for your load.

Cool Down tumbles the load without heat during the last few

minutes of all cycles to make the load easier to handle.

Drying tips

Follow care label directions when they are available.

If desired, add a fabric softener sheet. Follow package

instructions.

Remove the load from the dryer as soon as tumbling stops to

reduce wrinkling. This is especially important for permanent

press, knits, and synthetic fabrics.

Loading

Cycle and temperature tips

Use a High Heat setting for drying heavyweight items such as

towels and work clothes.

Use a Medium Heat setting for drying medium weight items,

such as sheets, underwear, permanent press fabrics, and

some knits.

Use a Low Heat setting for drying lightweight items such as

lingerie, blouses, dresses, and some knits.

Use a no-heat (air) setting for rubber, plastic, or heat-sensitive

fabrics.

Line dry bonded or laminated fabrics.

NOTE: If you have questions about drying temperatures for

various loads, refer to the care label directions. If you are unsure

of the temperature to select for a load, select a lower setting

rather than a higher setting.

Dryer Symbols

The control panel of your dryer contains symbols. Refer to the

chart below for a definition of those symbols.

Temperature Selector

Low

Heat

Start Button

End of Cycle Signal Selector

End of Cycle

Signal On

Cycle Control Knob

Automatic Drying Cycles

Heavyweight Items

Cupboard Dry

Synthetics/

Permanent Press

Delicates

Iron Dry

Continued on next page.......

Medium

High

Heat

End of Cycle

Signal Off

Cupboard Dry Plus

Cotton

Quick Dry

Cool Down

Machine Off