- ページ 6
ドライヤー Whirlpool 4GNED4600のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Whirlpool 4GNED4600 48 ページ。
ページを印刷する
CYCLE GUIDE — AUTOMATIC DRY CYCLES
Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle.
AUTOMATIC DRY - Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level.
Items to dry:
Jeans, heavy work
clothes, towels
Work clothes, medium
weight fabrics, sheets
Casual, shirts, pants,
lightweight items,
synthetics, delicates,
athletic wear
NOTE: If loads do not seem as dry as you would like, select More Dry next time you dry a similar load. If loads seem drier than you
like, select Less Dry next time you dry a similar load.
CYCLE GUIDE — TIMED DRY CYCLES
Not all cycles and settings are available on all models.
TIMED DRY - Will run the dryer for the specified time on the control.
Items to dry:
Large or heavy items
such as thick towels or
robes
Any load
Rubber, plastic, heat
sensitive fabrics
Setting the Drying Temperature
If your dryer has multiple heat settings:
A High Cotton temperature setting may be used for drying
heavyweight items such as towels and work clothes.
A Low Delicates to Medium Casual temperature setting may
be used for drying medium-weight items such as sheets,
blouses, dresses, underwear, permanent press fabrics, and
some knits.
6
Dryness Level:
Temperature
Fabric:
More Dry
High Cotton
Normal
Less Dry
More Dry
Medium Casual
Normal
Less Dry
Low Delicates
More Dry
Normal
Less Dry
Cycle:
Temperature:
Heavy Dry
Any
Damp Dry
Any
Air Dry
Air Only
Available
Options:
Temperature
Automatic cycles give the best drying
in the shortest time. Drying time varies
Wrinkle Prevent
based on fabric type, load size, and
End of Cycle Signal
dryness setting.
Select a drying temperature based on
Temperature
the fabrics in your load. If you are unsure
Wrinkle Prevent
of the temperature to select for a load,
End of Cycle Signal
select the lower setting rather than the
higher setting.
Temperature
Wrinkle Prevent
End of Cycle Signal
Available
Options:
Temperature
Choose high to dry large or heavy loads.
End of Cycle Signal
Temperature
Dries items to a damp level or for items
that do not require an entire drying
End of Cycle Signal
cycle.
Temperature
No heat drying.
End of Cycle Signal
Use the Air Dry (Air Only) setting for foam, rubber, plastic, or
heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for
various loads, refer to the care label directions.
Cycle Details:
Cycle Details: