- ページ 19

ドライヤー Whirlpool 883049268804のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Whirlpool 883049268804 44 ページ。

Reverse door swing round-shaped door - double handle

Remove door from dryer

IMPORTANT: If the protective film has not yet been removed

from the dryer, peel the film from the dryer door before

proceeding.

Using a TORX

T25 screwdriver, remove the 4 screws

securing the door hinge to the dryer and lift up and out to

remove the door. Place the door on a soft towel or other

non-scratch surface. Reinstall the 4 screws in the holes.

Move the door strike

Using a TORX T25 screwdriver, remove the 2 screws securing

the door strike to the door frame of the dryer. Rotate the

strike 180° and attach to the opposite side of dryer door

frame, as shown.

Remove inner door from outer door

Position the door with the inside of the door facing up.

Using a Phillips screwdriver, remove the 10 screws securing

the inner door to the outer door. Lift off the inner door and

set aside.

Remove hinge and latch

Using a TORX T25 screwdriver, remove the 3 TORX screws

securing the latch plate and latch backing plate and the

5 screws holding the hinge assembly in place.

Latch

Hinge