- ページ 17

ドライヤー Whirlpool Cabrio WED8700EのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Whirlpool Cabrio WED8700E 30 ページ。 Smart electronic dryer

ページを印刷する

Select type of load to dry

First select a cycle from the "What to Dry" (Automatic cycles) and

then select the "How to Dry" to get the best combination cycle

available for the type of items you are going to dry. See "Cycle

Guide" for cycle details. Not all cycles are available on all models.

Automatic Cycles:

You can select a different dryness level, depending on your

load. Touch DRYNESS to scroll to Less to More. Selecting

Less to More automatically adjusts the dryness level at which

the dryer will shut off. Dryness level can be changed in the first

5-8 minutes of the cycle.

Automatic Cycles give the best drying in the shortest time. Drying

time varies based on fabric type, load size, and dryness setting.

NOTE: Automatic Cycles will give you up to 3 temperatures to

adjust and it varies, depending on the "What to Dry" or "How

to Dry" selections that have been made.

TIMED DRY Cycle:

When you select Timed Dry, the default time appears in the

display. Touch "+" and "–" to increase or decrease the time in

1 minute increments. Touch and hold to change the time in 5

minute increments.

The default temperature may be changed by pressing

Temperature until the desired dry temperature is lit.

Steam Refresh Cycles:

If you will be unable to remove a load immediately, touch

FINISHING TOUCH twice to select Wrinkle Shield™, to add

up to 150 minutes of periodic tumbling.

Adjust cycle modifiers, if desired

You may adjust different settings,

depending on what you are drying and

how you are going to dry the item. See the

"Cycle Guide" for detailed information.

NOTE: Not all options and modifiers are

available with all cycles.

Select any additional options

Add additional options such as Static Reduce, Wrinkle

Shield™, and/or EcoBoost™ by touching that option. If you

will be unable to remove the load promptly, select Wrinkle

Shield™ before touching START/PAUSE.

NOTE: Not all options and settings are available with all cycles.

Touch and hold START/PAUSE to begin the cycle.

Promptly remove garments after cycle has completed

to reduce wrinkling.

Changing the Automatic Cycle settings

to increase or decrease drying time

If all your loads on all Automatic Cycles are consistently less

dry or more dry than you would like, you may change the

default settings to increase or decrease the default dryness

level.

Your automatic drying settings can be adjusted to adapt to

different installations, environmental conditions, or personal

preference. This change is retained and will affect all of your

Automatic Cycles, not just the current cycle/load. There are

5 drying settings, which are displayed using the time display:

To change the drying settings:

NOTE: The settings cannot be changed while the dryer

is running or paused. The dryer must be in standby mode

(power is off) to adjust the default settings.

1. Before starting a cycle, touch and hold DRYNESS

2. Touch DRYNESS to select the dryness level shown in

3. Touch and hold START/PAUSE to save the new dryness

Touch and hold START/PAUSE

to begin cycle

Remove garments promptly

after cycle is finished

0 Much wetter clothes, 30% less drying time.

1 Slightly wetter clothes, 15% less drying time.

2 Factory preset dryness level.

3 Slightly drier clothes, 15% more drying time.

4 Much drier clothes, 30% more drying time.

for 6 seconds.

the time display: 0, 1, 2, 3, or 4.

level setting.