- ページ 9

ドライヤー Whirlpool CABRIO WGD8600YW0のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Whirlpool CABRIO WGD8600YW0 36 ページ。 Gas dryer
Whirlpool CABRIO WGD8600YW0 にも：取付説明書 (36 ページ)

ページを印刷する

Adjust cycle modifiers,

if desired

_High

J o,e i .,um

I.....,ILow

Less

_E×tra Low

Damp

_ Air Only

Dryness

Temp

Level

Monuo/

Autornotic

Cycles Only

7, Press START/PAUSE

to begin cycle

start

pause

Press and hold the START/PAUSE button to begin the cycle.

You may adjust different settings, depending on whether you

have selected an Automatic

Cycle, or Manual Cycle. See the

"Cycle Guide" for detailed information.

NOTE: Not all options and settings are available with all cycles.

Not all cycles are on all models.

Automatic

Cycles:

You can select a different Dryness Level, depending on your

load, by pressing the Dryness Level button. Selecting More,

Normal, Less, or Damp automatically

adjusts the Dryness Level

at which the dryer will shut off. Once the Dryness Level is set,

it cannot be changed without stopping the cycle.

Sensor cycles give the best drying in the shortest time. Drying

time varies based on fabric type, load size, and dryness setting.

Timed Cycles:

When you select a Timed Cycle, the default

time appears in the display. Use the Time

Adjust buttons to increase or decrease the

time in 1 minute increments. Press and hold

to change the time in 5 minute increments.

Est.Time Remaining

Time Adjust

The default temperature

may be changed by pressing

the Temp button until the desired drying temperature

lights up.

Steam Cycles:

Quick Refresh with Steam:

Reduces odors and light wrinkles from small to medium-sized

loads of dry items. Use the Time Adjust buttons to select the

time appropriate for the load you want to dry. Cycle time is

adjustable in 5 minute increments.

Enhanced Touch Up with Steam:

This cycle is best for reducing wrinkles and odors from dry

garments. Dry time will automatically

adjust when the load size

is sensed. Temperature is selectable.

6, Select

any additional

options

EcoBoost

_S_

Cycle Signal

f. - Loud

•

[

{((2))) /Soft

Reduce

_.//Off

Damp Dry

Signal

I Steam

No Steam

Wrinkle

Shield

Remove

garments

promptly

after cycle

is finished

I Steam

No Steam

Wrinkle

Shield

Promptly remove garments after cycle has completed to

reduce wrinkling. If you will be unable to remove the load

promptly, select the WRINKLE SHIELD

option (with or without

Steam) before pressing START/PAUSE.

the Automatic

Cycle settings

to increase

drying

time

If all your loads on all Automatic

Cycles are consistently

not as dry as you would like or are too dry, you may change

the default settings to increase or decrease the default

Dryness Level.

The sensor drying settings on Automatic

Cycles can be

adjusted to adapt to different installations, environmental

conditions or personal preference. This change is retained

and will affect all of your Automatic

Cycles, not just the

current cycle/load.

There are 5 drying settings, they will appear in the time

display:

01 Factory preset dryness level.

02 Slightly drier clothes, 15% more drying time.

03 Much drier clothes, 30% more drying time.

04 Much damper clothes, 30% less drying time.

05 Slightly damper clothes, 15% less drying time.

To change

the drying

settings:

NOTE: The settings cannot be changed while the dryer

is running or paused. The dryer must be in standby mode

(the Power button is off) to adjust the default settings.

1. Before starting a cycle, press and hold the TEMP

button for 6 seconds.

2. Press the DRYNESS LEVEL button to select the dryness

level shown in the time display: 01,02, 03, 04, or 05.

3. Press START/PAUSE to save the new Dryness Level

setting.

Add additional options such as Eco Boost, Static Reduce,

and Wrinkle Shield

(with or without Steam) by pressing

the button for that option.

NOTE: Not all options and settings are available with all cycles.