- ページ 5

ドライヤー Whirlpool Cabrio,- WED7300XのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Whirlpool Cabrio,- WED7300X 32 ページ。 Top-loading high efficiency low-water washer
Whirlpool Cabrio,- WED7300X にも： 取扱説明書 (40 ページ), 取扱説明書 (40 ページ), 取扱説明書 (36 ページ), インストールマニュアル (16 ページ), 取扱説明書 (40 ページ), 取扱説明書 (40 ページ), 寸法と設置について (1 ページ), 寸法マニュアル (2 ページ), 取扱説明書 (40 ページ), 取扱説明書 (48 ページ), 取扱説明書 (40 ページ), 取扱説明書 (40 ページ), 取扱説明書 (40 ページ), 取扱説明書 (44 ページ), 取扱説明書 (19 ページ), 使用とお手入れ グード (44 ページ), 取扱説明書 (44 ページ)

ページを印刷する
Whirlpool Cabrio,- WED7300X 取扱説明書
NOTE: This Use and Care Guide covers several different models. Your dryer may not have all of the cycles and features described.
WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS
before operating this appliance. The following is a guide to using your dryer.
Please refer to specific sections of this manual for more detailed information.
START
1. Clean the lint screen before each load.
2. Place laundry in dryer and shut door.
3. Press POWER.
4. Select AUTOMATIC or MANUAL cycle.
5. Select OPTIONS and/or CYCLE SIGNAL, if desired.
See "Additional Features."
6. Press and Hold START/PAUSE to begin.

AUTOMATIC CYCLES

Automatic Cycles match the cycle setting to the type
of load, and adjust Dryness Level for optimal performance.
See "Automatic Preset Cycle Settings Chart."
1. Press POWER.
2. Turn knob to desired Automatic Cycle.
3. Select DRYNESS LEVEL to adjust how dry you
want the load.
4. Select OPTIONS.
5. Press and Hold START/PAUSE.
To make changes to the Dryness Level:
NOTE: Dryness selections can be made only while using
Automatic Cycles.
1. Press START/PAUSE once.
2. Select DRYNESS LEVEL.
3. Press and Hold START/PAUSE.
STOPPING, PAUSING, OR RESTARTING
To stop or pause
Open the door or press START/PAUSE once.
Press START/PAUSE twice to cancel a cycle.
To restart
Close the door. Press and Hold START/PAUSE.

QUICK START GUIDE

MANUAL CYCLES
Use Manual Cycles to set a drying time
and temperature.
1. Press POWER.
2. Turn knob to desired Manual Cycle.
3. Press TIME ADJUST up or down arrow buttons until the
desired drying time is displayed.
4. Press TEMP until the desired temperature illuminates.
NOTE: During the Manual Cycle, you can change the
settings for Time, Temp, the WRINKLE SHIELD™ feature,
and Cycle Signal.
5. Press and Hold START/PAUSE.
TIMED DRY - Use this cycle if items are still damp after an
Auto cycle.
QUICK DRY (on some models) - Use this cycle for drying
small loads or items requiring a short drying time.
TOUCH UP (on some models) - Use this cycle to help
smooth out wrinkles from clean, dry clothes.

STEAM CYCLES

(Steam models only)
Steam Cycles use water and heat to reduce
wrinkles and odors in dry items. See "Cycles"
for more details on each cycle.
1. Press POWER.
2. Select ENHANCED TOUCH UP or QUICK REFRESH 1-4
or 5-8 Garments cycle.
3. Press TIME ADJUST up or down until the desired drying
time is displayed (only on Enhanced Touch Up Cycle).
4. Press TEMP until the desired temperature illuminates.
5. Press and Hold START/PAUSE.
5