- ページ 11

ドライヤー Whirlpool Duet Sport YWED8300SW2のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Whirlpool Duet Sport YWED8300SW2 44 ページ。 Electronic electric dryer

Remove the 6 Phillips head screws to release the outer door

assembly from the inner door assembly, as indicated below.

See illustration.

It is important that you remove only the

6 indicated screws.

4. Lift the inner door assembly off the outer door assembly.

5. Disengage locking tabs by rotating inner ring clockwise. See

illustration.

A. Inner ring

B. Outer ring

6. Turn inner ring 180 ° and lock tabs into place.

Reverse hinge

1. Use a small flat-blade screwdriver to remove 2 plug strips

from the inner door. Slide the head of the screwdriver under

the plugs, being certain not to scratch the inner door surface.

Lift up.

Remove hinge cover.

A ...............................

(__

A. Door hinge

B. Plug strips

C. Hinge cover

Remove the 4 screws that attach to the inner door hinge and

move the hinge to the other side. Reinstall the 4 screws.

A. Door hinge

4. Reinstall plug strips on opposite side of the inner door.

5. Check for fingerprints

on the glass. Clean glass if necessary.

6. Place the inner door assembly inside the outer door

assembly. To fit correctly, the inner door assembly edge fits

completely inside the outer door assembly edge.

7. Reassemble the inner and outer door assemblies with the

6 screws.