- ページ 19
ドライヤー Whirlpool WGD7500GWのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Whirlpool WGD7500GW 40 ページ。 Electronic dryer
Whirlpool WGD7500GW にも： 取扱説明書 (32 ページ)
ページを印刷する
CONNECT VENT
1.
Connect vent to exhaust outlet
Using a 4" (102 mm) clamp, connect vent to exhaust outlet
in dryer. If connecting to existing vent, make sure vent is
clean. Dryer vent must fit over dryer exhaust outlet and inside
exhaust hood. Check that vent is secured to exhaust hood
with a 4" (102 mm) clamp.
2.
Move dryer to final location
Move dryer to final location. Avoid crushing or kinking vent.
LEVEL DRYER
1.
Level Dryer
Place
level here
Check levelness of dryer from side to side. Repeat from
front to back.
NOTE: The dryer must be level for the moisture sensing
system to operate correctly.
Not Level
LEVEL
2.
Adjust leveling legs
If dryer is not level, prop up using a wood block. Use wrench
to adjust legs up or down, and check again for levelness.
Place
level here
Not Level
19