- ページ 7

ドライヤー Whirlpool WGD9150WWのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Whirlpool WGD9150WW 25 ページ。 Electronic dryer

ページを印刷する

Additional Features

WRINKLE SHIELD™ Feature

When you are unable to remove a load of clothes from the dryer

as soon as it stops, wrinkles can form. The WRINKLE SHIELD™

feature periodically tumbles, rearranges, and fluffs the load to help

keep wrinkles from forming.

■

Get up to 60 minutes of heat-free, periodic tumbling at the

end of a cycle. Pressing the WRINKLE SHIELD™ button to

turn ON or OFF at any time before the cycle has ended.

■

The WRINKLE SHIELD™ feature is preset to "OFF." If selected

for other cycles, the WRINKLE SHIELD™ feature setting will

remain "ON" the next time that cycle is selected.

Signal

The Signal produces an audible sound when the drying cycle is

finished. Press the SIGNAL button to turn On or Off at any time

before the cycle has ended.

NOTE: When the WRINKLE SHIELD™ feature is selected and the

Signal is on, an audible sound will be emitted every 20 minutes

until the clothes are removed, or the WRINKLE SHIELD™ feature

is finished.

Control Lock/Unlock

This feature allows you to lock your settings to avoid unintended

use of the dryer. You can also use the Control Lock feature to

avoid unintended cycle or option changes during dryer operation.

To enable the Control Lock feature when dryer is running:

Press and hold the SIGNAL button for 3 seconds.

The control is locked when a single beep is heard

and the Control Lock status light is on.

To enable the Control Lock feature when dryer is OFF:

When the dryer is off, it is not necessary to press the POWER

button before activating the Control Lock feature.

To unlock:

Press and hold the SIGNAL button for 3 seconds to turn this

feature off.

NOTE: When the dryer is running and Control Lock is on, the

dryer can be stopped by pressing the START/PAUSE button,

but cannot be restarted until the control is unlocked.

Changing Cycles and Settings

You can change Automatic Cycles, Timed Cycles, and the drying

temperature on Timed Cycles at any time before pressing Start.

■

Three short tones sound if an unavailable combination is

selected. The last selection will not be accepted.

Changing Cycles after starting dryer

1. Press the POWER button. This ends the current cycle and

turns the dryer OFF.

2. Press the POWER button again to turn on the dryer.

3. Select the desired cycle and options.

4. Press and hold START/PAUSE. The dryer starts at the

beginning of the new cycle.

Changing settings on Timed Cycles during the cycle

You can change the temperature setting at any time during the

cycle by pressing the TEMP button.