- ページ 5
ドライヤー Whirlpool WGD94HEXL1のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Whirlpool WGD94HEXL1 40 ページ。 Electronic dryer
ページを印刷する
CHECK YOUR
SYSTB
FOR GOOD AIR FLOW
Fire Hazard
Use a heavy metal vent.
Do not use a plastic vent.
Do not use a metal foil vent,
Failure to follow
these instructions can result in death
or fire.
Good air flow
Along with heat, dryers require good air flow to efficiently
dry laundry. Proper venting will reduce your drying times
and improve your energy savings. See Installation
Instructions.
The venting system attached to the dryer plays a big role in
good air flow.
Service calls caused by improper venting are not covered
by the warranty and will be paid by the customer, regardless
of who installed the dryer.
Maintain
good
air flow
by:
[] Cleaning your lint screen before each load.
[]
Replace plastic or foil vent material
with 4" (102 mm) diameter heavy, rigid
vent material.
[] Use the shortest length of vent possible.
[] Use no more than four 90 ° elbows in a vent system;
each bend and curve reduces air flow.
............... Bett
.................
[]
[]
Remove lint and debris from the exhaust hood.
[]
Remove lint from the entire length of the vent system
at least every 2 years. When cleaning is complete, be
sure to follow the Installation Instructions supplied with
your dryer for final product check.
Clear away items from the front the dryer.
Use Auto cycles for better
fabric
care and energy
savings
Use the Auto Cycles to provide the most energy savings and enhanced fabric care from the dryer. During Automatic Cycles,
drying air temperature
and moisture level are sensed in the load. This sensing occurs throughout the drying cycle and the dryer
shuts off when the load reaches the selected dryness. Use the NORMAL DRY dryness level to provide optimal energy savings.
With Timed Dry, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due to
over=drying. Use Timed Dry for the occasional damp load that needs a little more drying time or when using the drying rack.
Tips for getting
the best performance
from your steam
dryer
[] Results may vary depending
on fabric. 100% cotton
[]
garments with wrinkle-free finish may yield better results
than those without. 100% cotton items may require
additional touching up after the Steam Cycle.
[]
Use of fabric softener sheet is not recommended
with
Steam Cycles. It may cause temporary staining on clothes.
It is not recommended
to use Steam Cycles for items that
have been starched. Wash any starched or new garments
prior to using a Steam Cycle.
The Quick Refresh Cycle is best for smoothing out wrinkles
and reducing odors from loads consisting
of one to four
dry items of wrinkle-free
cotton, cotton-polyester
blend,
common knits, and synthetic garments.
[]
[]
The Enhanced Touch Up Cycle is best for smoothing out
wrinkles from clothes that have been left in the dryer too
long. For best results, do not overload the dryer.
On some models, the Quick Refresh Cycle time is set for 15
minutes and is not adjustable. Under certain environmental
or installation conditions, you may experience under drying
with the Quick Refresh Cycle. Select Enhanced Touch Up
Cycle which can be customized to select High Temperature
and/or additional cycle time by pressing the Timed Dry
Adjust More Time button.