- ページ 13

ドライヤー Whirlpool WGD96HEAWのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Whirlpool WGD96HEAW 44 ページ。 7.4 cu. ft. duet steam gas dryer with advanced moisture sensing
Whirlpool WGD96HEAW にも：取扱説明書 (8 ページ), 取扱説明書 (40 ページ)

ページを印刷する

1. Installation Requirements

Tighten couplings

Fig. A

Using pliers, tighten the couplings with additional

two-thirds turn.

NOTE: Do not overtighten. Damage to the coupling

can result.

Attach long hose to "Y"

connector and tighten couplings

One end of the long hose has a wire mesh strainer inside the

coupling. Attach this end to the "Y" connector. Attach washer

cold inlet hose to other side of "Y" connector. Screw on

coupling by hand until it is seated on connector. Using pliers,

tighten the couplings an additional two-thirds turn.

NOTE: Do not overtighten. Damage to the coupling can result.

Attach long hose to dryer fill valve

and tighten coupling

Fig. B

Remove protective cap from

water inlet valve. Attach other end

of long hose to fill valve at bottom of dryer

back panel. Screw on coupling by hand until it is seated on

fill valve connector. Using pliers, tighten the couplings an

additional two-thirds turn.

NOTE: Do not overtighten. Damage to the coupling

can result.

Turn on cold water faucet

Check that the water faucets are turned on.

Check for leaks

Check for leaks around "Y" connector, faucet, and hoses.