- ページ 16

ドライヤー Whirlpool WPWADRGW785のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Whirlpool WPWADRGW785 48 ページ。 Gas dryer/canadian electric dryer

DOOR REVERSAL (OPTIONAL)

The following instructions are for models with a round and

square-shaped doors.

Tools needed:

Min. 8" long TORX T25

††

screwdriver

Reverse door swing round-shaped door flat glass –

single handle

Remove door from dryer

IMPORTANT: If the protective film has not yet been

removed from the dryer, peel the film from the dryer

door before proceeding.

Using a T25

screwdriver, remove the 4 screws securing the

door hinge to the dryer and lift up and out to remove the door.

Place the door on a soft towel or other non-scratch surface.

Reinstall the 4 screws in the holes.

#2 Phillips screwdriver

Move the door strike

Using a T25

screwdriver, remove the 2 screws securing the

door strike to the door frame of the dryer. Rotate the strike

180° and attach to the opposite side of dryer door frame

as shown.

Remove inner door from outer door

Position the door with the inside of the door facing up.

Using a Phillips screwdriver, remove the 10 screws securing

the inner door to the outer door. Lift off the inner door and

set aside.

® TORX and T25 are registered trademarks of Acument Intellectual Properties, LLC.

††