- ページ 8

ドライヤー Whirlpool YWED72HEDWのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Whirlpool YWED72HEDW 41 ページ。 Electronic dryer

ページを印刷する

POWER

Touch to turn the dryer on and off. Touch to stop/cancel

a cycle at any time.

CYCLE CONTROL KNOB

Turn the knob to select a cycle for your laundry load.

Automatic Cycles are Heavy Duty, Normal, Bulky, Casual

(on some models), Delicates, Towels (on some models),

and Sanitize (on some models). Manual Cycles are

Quick Dry and Timed Dry. The Steam Cycle (on some

models) is Steam Refresh. See "Cycle Guide" for detailed

descriptions of cycles.

START/PAUSE

Touch and hold until the LED comes on to start a cycle,

or touch once while a cycle is in process to pause it.

LED DISPLAY AND SETTINGS

When you select a cycle, its settings will light up and the

Estimated Time Remaining (for Automatic Cycles) or actual

time remaining (for Manual Cycles) will be displayed. On

2-digit displays, for times longer than 99 minutes, hours

will be displayed followed by minutes.

See "Cycle Guide" for available settings on each cycle.

Not all settings are available with all cycles.

Cycle Status Lights

The indicators at the top of the display will let you

know what stage of the drying cycle is in process.

For more information on each stage, see "Cycle Status

Indicators."

–/+ (Adjust Drying Time)

Touch "+" or "–" with Manual Cycles to increase or

decrease the length of a Timed Dry or Quick Dry cycle.

Temp

When using Manual Cycles or Steam Refresh, you may

select a dry temperature based on the type of load

you are drying. Use the warmest setting safe for the

garments in the load. Follow garment label instructions.

NOTE: Automatic Cycles use a preset temperature that

is not adjustable.

Dryness Level

When using Automatic Cycles (except for the Sanitize

cycle), you may select a Dryness Level based on the

type of load you are drying.

NOTE: Dryness Level is for use with Automatic Cycles

only.

Damp Dry Signal (on some models)

Touch to select the Damp Dry Signal. When selected, a

series of beeps will sound when the load is damp, but

not completely dry. This will allow you to take clothes

out of the load that do not need to dry completely.

This option is available on Heavy Duty, Normal, Bulky,

Casual, Delicates, and Towels cycles. The Damp Dry

Signal is selected as a default for the Bulky cycle, as

a reminder to manually reposition bulky loads midway

through the cycle.

Wrinkle Shield

Option

™

If you will be unable to remove a load immediately,

touch Wrinkle Shield to add up to 140 minutes of

periodic tumbling to help reduce wrinkling. You may

select the "With Steam" setting (on some models)

to add a short steam cycle after 60 minutes to help

smooth out wrinkles.

OPTIONS

Use to select available options for your dryer. Not all

cycles and options are available on all models.

Steam

Touch to activate the Steam option, which adds steam

to the end of the Heavy Duty, Towels, Normal, or Bulky

cycle to help smooth out wrinkles. The Steam option

can be used with High or Medium heat settings.

EcoBoost

Option

™

Touch to activate the EcoBoost

you to increase your energy savings by using a slightly

lower heat level. For automatic cycles the EcoBoost

option will increase drying times by approximately 40

minutes; the LED Display will reflect this time.

The EcoBoost

option will default on for Normal.

™

For optimal energy turn on the EcoBoost

For optimal time turn off the EcoBoost

NOTE: Energy savings may vary across loads and

cycles.

Static Reduce

Touch to add the Static Reduce option to selected

Automatic cycles (see the "Cycle Guide"). The dryer

will automatically tumble, pause, and introduce a small

amount of moisture into the load to help reduce static.

This option adds approximately 8 minutes to the total

cycle time.

Drum Light

Touch to turn the LED drum light on or off. The light

will also turn on when the door is open, and turn off

automatically after about 5 minutes.

Cycle Signal

Use this to turn the signal indicating the end

of a drying cycle on or off.

NOTE: You may also turn off the tones that sound

when a feature, setting, or option is touched. Touch

and hold Cycle Signal for about one second to turn

sounds on or off.

Control Lock

Use to lock the controls of the dryer and avoid

an accidental change in cycle options or preferences

during a drying cycle.

Touch and hold CONTROL LOCK for 3 seconds to

lock or unlock the controls of the dryer. During this

time, the LED Display will count down 3-2-1. Once

the controls are locked, the LED Display will display

"Lc" or "Loc."

NOTE: The Control Lock function may be enabled

when recovering from a power failure. To unlock the

control, touch and hold CONTROL LOCK for at least

3 seconds.

option, which allows

™

option.

™

option.

™