ページを印刷する75184.fm5 Page 6 Tuesday, October 10, 2000 3:23 PM
AKR 976/1-AKR 976-AKR 999
AKR 676/1-AKR 676-AKR 677-AKR 678
Fig. 1
1. Control panel.
2. Grease filters.
3. Lighting unit.
4. Telescopic flue.
5. Grease filter release-replace handle.
6. Ladle holder (only AKR 677).
Removing and renewing or cleaning the
grease filter:
1. Unplug the appliance or disconnect the mains
power supply.
2. Remove the grease filters (Fig. 1):
a - push the handles backwards
b - and then downwards.
3. After the grease filter has been replaced or
cleaned (depending on model), refit the parts
in reverse order, making sure the entire
extraction surface is covered.
Replacing bulbs
1. Unplug the appliance or disconnect the mains
power supply.
2. Remove the grease filters.
3. Remove the lighting unit from the clips that fix
it to the hood body (Fig. 2).
4. Remove the burnt-out bulb.
Replace using 40W max (E14) bulbs only.
5. Refit the lighting unit.
Fitting or renewing the carbon filter -
Fig. 3:
1. Unplug the appliance or disconnect the mains
power supply.
2. Remove the grease filters.
3. If the carbon filters are already mounted (two
filters covering the motor protection grille) and
need renewing, turn the central handle
anticlockwise until the filters release.
4. If the filters are not already fitted, locate one
on each side to cover both motor protection
grilles, then turn the central filter handle
clockwise.
5. Replace the grease filters.
5019 100 75184
PRODUCT SHEET
CONTROL PANEL
A. Light switch.
B. Speed selector switch.
AKR 976
AKR 999
AKR 676
AKR 677
AKR 676/1
AKR 976/1
small amount of steam
and fumes
AKR 678
Fig. 3
D
GB
F
NL
E
small amount of
steam and fumes
medium amount of
steam and fumes
medium amount of
large amount of
steam and fumes
steam and
fumes
Fig. 2
P
I
GR
large
amount
of steam
and
fumes