- ページ 13

換気フード Whirlpool UXD8636DYSのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Whirlpool UXD8636DYS 36 ページ。 30 76.2 cm and 36 91.4 cm retractable pop-up downdraft vent system
Whirlpool UXD8636DYS にも：取付方法とお手入れ方法 (40 ページ)

ページを印刷する

2. Remove 4 screws attaching the terminal box cover.

A. Terminal box cover

3. Determine which direction (front or rear) the home power

supply cable will enter the terminal box. Remove the

appropriate knockout from the front or rear panel and install a

¹⁄₂" (12.7 mm) UL listed or CSA approved conduit connector.

4. Using 2 or more people, insert the downdraft vent into the

countertop cutout. Position downdraft vent so it is centered

in the cutout with the rear flange over the edge of the cutout

and the rear of the vent box against the edge of the cutout.

A. Rear flange of downdraft vent

B. Edge of cutout in countertop

C. Rear of downdraft vent

D. Cabinet back

E. Lower support leg

F. Cabinet floor

G. Countertop

5. Drill 2 pilot holes through each of the undercounter mounting

brackets into the underside of the countertop. Using 2 screws

(not provided) of the appropriate length, mount the brackets

to the countertop.

IMPORTANT: Select a screw length that will not allow the

screws to go through the countertop when tightened.

A. Screws

B. Backsplash

C. Countertop

6. Check that the downdraft vent is level vertically. Loosen the

lower support legs screws and position the legs against the

cabinet floor.

7. Fasten the lower support legs to the cabinet floor with screws

(not provided).

A. Screw (not provided)

8. Tighten the lower support legs screws.

Make Electrical Connections

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

1. Disconnect power.