- ページ 9
屋外用家具 Backyard Living Structures PERGOLAのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Backyard Living Structures PERGOLA 15 ページ。
ページを印刷する3A INSTALL 5" X 5" POST
OVER POST MOUNT
a.
Cut each 5x5 vinyl post sleeve to proper height.
•
Cut post ½" shorter than recorded measurements.
b.
Install skirts and optional trim rings on to
your vinyl post sleeve, these fit tight.
c.
Slide vinyl post over the top of the
aluminum post mount.
•
Your vinyl post should stick up 1" taller
than the top of the aluminum mount to
allow room for pyramid post cap.
½"
Top of Beam height
Cut Vinyl Post here
3B INSTALL COLUMN OVER
POST MOUNT (7" SQUARE/ 7"
ROUND/10" ROUND COLUMN)
a.
Cut each vinyl column sleeve to proper height:
•
Kits with a 6" beam:
Cut column 8" shorter than
recorded measurements.
•
Kits with an 8" beam:
Cut column 10" shorter than
recorded measurements.
b.
Slide column base, sleeve, and cap over post
mount (in that order), these fit tight.
c.
Slide the 5" x 5" vinyl post cover with cap
over the aluminum post mount.
•
This slides through the hole in
the top of the column cap.
d.
Secure column base to a deck with wood
deck screws; to a footing or slab with small
concrete screws (Tapcons
Beam Width
(6" or 8")
www.backyardlivingstructures.com
or similar)
®
Top of
Beam height
Cut Vinyl
2"
Column here
800-352-1672
9