- ページ 9

換気フード Whirlpool UXT4136ADのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Whirlpool UXT4136AD 28 ページ。 30" and 36" (76.2 and 91.4 cm) range hood
Whirlpool UXT4136AD にも：取扱説明書 (28 ページ), 取扱説明書 (28 ページ)

ページを印刷する

12. Make Electrical Connection

Option 1 - Direct Wire Installations

Use a UL Listed/CSA Approved wire connector and connect

the 2 white wires (A) together.

Use a UL Listed/CSA Approved wire connector and connect

the 2 black wires (B) together.

WARNING

Fire Hazard

Electrically ground the blower.

Use copper wire.

Connect ground wire to green ground screw in

terminal box.

Failure to do so can result in death, fire, or

electrical shock.

Connect the green (or bare) ground wire (C) from the power

supply to the green ground screw in the electrical box and

tighten the screw securely.

Reinstall the electrical box cover.

Reconnect power.

Option 2 - Power Cord Kit Installations

For optional power cord kit installations, follow the instructions

supplied with the power cord kit. See the "Assistance or Service"

section for information on ordering.

13. Complete the Installation

Install a 120V, 75W maximum, incandescent light bulb with

E26 base. See "Replacing the Incandescent Light Bulb" in the

"Range Hood Care" section.

If removed previously, replace the filter. See "Metal or Charcoal

Grease Filter" in the "Range Hood Care" section.

For vented installations: Install a metal filter.

For non-vented (recirculating) installations: Install a

charcoal filter.

Check the operation of the range hood fan and light. See the

"Range Hood Use" section.

If the range hood does not operate, check to see whether a

circuit breaker has tripped or a household fuse has blown.

Disconnect the power and check the wiring connections.

NOTE: To get the most efficient use from your new range hood,

read the "Range Hood Use" section.