- ページ 9

換気フード Whirlpool WT9BTABCのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Whirlpool WT9BTABC 19 ページ。

3. Draw and mark a center vertical line C on the wall (See FIG 4).

4. Mark hood height line B. (303 mm from line A)

5. Mark screw holes for hooking the hood on line B, total length is 230mm (from left to right).

6. Fix the hook with 3pcs ST4*40mm screws into studs on line B. (For hang the hood)

Screw of hook

7. Install the hook on a suitable place once the installation height is fixed, and keep it in line. The

fixed position of inside chimney bracket is the highest place of chimney. See FIG 5.

8. Fix outside chimney bracket on the outside chimney, and ensure that the inside chimney height

can be adjusted freely. Afterwards, install the expansion pipe (not included) and chimney on the

cooker hood.

Fix the expansion pipe with the cable tie on the outlet. See FIG 6 & FIG

Screw of hook

inside chimney bracket

Screw of hook

hook

(FIG 5)

Unit: mm

(FIG.4)