- ページ 10

パティオ・ヒーター Firesense LIP-10A-TGG-NTS-1のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Firesense LIP-10A-TGG-NTS-1 17 ページ。 Outdoor patio heater

ASSEMBLY

8. While supporting heater, tilt the Head Assembly (C) and slide the assembled

Reflector over the 3 bolts that extend from the Head Assembly. Use

3 M8 Wing Nuts and 3 M8 Washers to secure the assembled

Reflector to the Head Assembly of the heater. Once you have tightened the

Wing Nuts, return the heater to an upright position.

Hardware Used: 3 - M8 Wing Nuts

3 - M8 Washers

9. Connect the hose and regulator (from natural gas company) to the

natural gas outlet. The natural gas is obtained from your natural gas

supply company. Use a standard 7" WC natural gas only.

NOTE: Use this heater only with natural gas supply system. See chapter 5

of the standard for storage and handling of liquefied petroleum gas,

ANSI/NFPA 58. Your local library or fire department should have this book.