- ページ 5

ヒーター Firesense 60262のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Firesense 60262 14 ページ。 Outdoor tabletop heater
Firesense 60262 にも：オーナーズマニュアル (16 ページ)

ASSEMBLY

Before beginning assembly of this appliance, make sure all parts are present.

Compare all parts with package contents list and hardware contents as listed on the previous page. If any part is

missing or damaged, do not attempt to assemble this product. Contact customer service for replacement parts.

ESTIMATED ASSEMBLY TIME: 30 minutes

Tools Required for Assembly (NOT included):

• • Phillips screwdriver w/medium blade

STEP 1

Remove all parts of the heater from the

packaging. (NOTE: Plastic ring on tank

housing should already be in place but if not,

slide the plastic ring over the bottom of tank

housing.)

STEP 3

Place the Burner on the Tank Housing,

then join them using 4 3/16" Bolts.

• • Slip joint/adjustable pliers

STEP 2

Use 4 M6x15mm Bolts to fix the tank

housing to the base and cast iron weight

(NOTE: weight is pre-assembled to base).

Use Wrench to tighten the Bolts as

shown above.

STEP 4

Fix the Regulator to the Tank Housing

using a M5x10mm Bolt and M5 Nut.

• • Adjustable wrench (2)