- ページ 5

安全装置 Firesense 63246のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Firesense 63246 6 ページ。 Round tempered glass wind guard for gas fire pits
Firesense 63246 にも：マニュアル (6 ページ)

ページを印刷する

ASSEMBLY

Loosen set-screws and carefully slide Bottom Bracket B onto

glass with rubber foot pointed up. Position edge of glass panel

flush with bracket edge. Check that silicone guards are in

place, then secure all set-screws, making sure to not over-

tighten. Secure remaining three bottom brackets using the

same procedure.

Hardware Used:

Carefully, using two people, turn the assembled wind guard

upright. Gently set the glass guard onto fire pit, positioning the

feet flat and level at the edges of the burner.

Be aware that the glass and hardware may become warm or

hot after prolonged burning of the fire pit and take reasonable

precautions to avoid burns.

CARE: When wind guard is completely cool, it may be

cleaned with a soft cloth or paper towel and standard glass

cleaner. Never spray cleaner or water on a hot wind guard, as

it could crack or shatter.

Bottom Bracket x4

Bottom Brackets