B.
INSTALLATION
1
Install the wall hangers (a) according to the roughing in illustration.
2
Apply seal tape to the collar (b) and install the flange (c) to the pipe, then
install them to the wall using pipe sealant, screws and fishers (e).
3
Place the gasket (d) onto the flange (c) with the beveled surface facing
away from the collar.
4
Carefully position the urinal on the wall hangers (f).
5
Secure the urinal to the female collar using the screws and washers
provided (g).
1
Water Inlet
1150-1170
b
820
e
415
Water Outlet
*This is recommended size, but could be changed
based on your needs and the size might change
following the product's size
* This illustration below is for wall hang urinal with top inlet manual flush.
II
Installed
to the
wall first
using seal
tape
Installed
from above
Installed
from below
2
a
Hole Screw
Hanger
c
d
III
Installed to
the urinoir
and connect
it with the
flush valve
I
Screw
Fisher
Nozzle for
Moslem
Purpose
2
3
Install the nozzle
I.
to the urinoir like
the picture provided
Install the flush valve
II.
to the inlet pipe using
seal tape
Install flush pipe
III.
to the up side of the
urinoir using both
seal and ring cap
f
g