- ページ 7

カーレシーバー Clarion CZ202のPDF オーナーズマニュアル＆インストレーションマニュアルをオンラインで閲覧またはダウンロードできます。Clarion CZ202 16 ページ。 Cd/usb/mp3/wma receiver
Clarion CZ202 にも：オーナーズマニュアル＆インストレーションマニュアル (18 ページ)

ページを印刷する

System Setup

In any mode, press and hold [DISP] button

to enter system setup. Press [

] or [

button to select options, rotate the [VOLUME]

knob to adjust.

CLOCK

Press the [VOLUME] knob to enter clock setting

mode, rotate the [VOLUME] knob to set clock,

press [

] or [

] button to select hour or

minute, press and hold the [VOLUME] knob to

confirm.

DX/LO (RADIO mode)

Rotate the [VOLUME] knob to choose radio

local or distant at RADIO mode.

• LO: Only stations with strong signal can be

received.

• DX: Stations with strong and weak signals

can be received.

AUX SENS (AUX mode)

Rotate the [VOLUME] knob to choose AUX

Input sensitivity LOW, MID or HIGH at AUX

mode.

SCRN SVR: ON/OFF

Rotate the [VOLUME] knob to choose SCRN

SVR (screen saver) ON or OFF.

SCROLL: ON/OFF

For track information that is longer than the

display panel:

When SCROLL is ON, the LCD will scroll the

ID3 TAG information across the display, e.g.:

TRACK->FOLDER->FILE->ALBUM->TITLE-

>ARTIST->TRACK->...

When SCROLL is OFF, the LCD will display

one of the ID3 TAG information, the default is

Audio Setup

Press the [

] button to enter sound effect

setting mode. First press shows current EQ.

Rotate the [VOLUME] knob to change the

BEAT EQ in this order:

OFF -> B-BOOST -> IMPACT -> EXCITE ->

TRACK, but user can adjust it to other ID3

TAG information by press [DISP] button.

]

S-CTRL (IPOD mode) : ON/OFF

Rotate the [VOLUME] knob to choose S-CTRL

(Simple control) ON or OFF.

* Refer to P9.

DIMMER: ON/OFF

Rotate the [VOLUME] knob to choose

DIMMER ON or OFF.

ON: LCD dimmer is active when small light

of vehicle is turned ON.

• OFF: LCD always maximum brightness

regardless of the vehicle small light.

PANDORA: ON/OFF

Select OFF if the PANDORA application

has not been installed on your iPod touch or

iPhone.

REAR/S-W

Rotate the [VOLUME] knob to choose REAR

or S-WOOFER (SUB-WOOFER).

BEEP: ON/OFF

Rotate the [VOLUME] knob to choose button

beep sound ON or OFF.

12/24H

Rotate the [VOLUME] knob to choose time

format: 12 or 24 hours.

CUSTOM

Rotate the [VOLUME] knob to change the

CUSTOM, and press the [VOLUME] knob,

the press [

] or [

] button to select it

including: BAS-G -> BAS-F -> BAS-Q ->

Audio Setup

MID-G -> MID-F -> MID-Q -> TRE-G -> TRE-F,

rotate the [VOLUME] knob to select a value.

BAS-G / MID-G / TRE-G: (-7)- (+7)

BAS-F: 60 / 80 / 100 / 200

BAS-Q: 1.0 / 1.25 / 1.5 / 2.0

MID-F: 500 / 1K / 1.5K / 2.5K

MID-Q: 0.5 / 0.75 / 1.00 / 1.25

TRE-F: 10.0K / 12.5K / 15.0K / 17.5K

Press the [

] button, then press [

]

or [

] button to select USER preset

including:

Radio Operations

Select tuner as playing source

Press [SRC /

] button once or more to

enter RADIO mode.

Selecting the radio band

Press the [BAND] button on the panel or on

the remote control to select one radio band

among FM1, FM2, FM3, AM.

Manual tuning

During manual tuning, the frequency will be

changed in steps.

Press the [

] button on the panel

] or [

to tune in a higher / lower station.

Press the [

] button on the

] or [

remote control to select preset stations.

Auto tuning

Press and hold the [

] button

] or [

to seek a higher / lower station.

To stop searching, repeat the operation

above or press other buttons having radio

functions.

Note:

When a station is received, searching stops

and the station is played.

Preset scan

Preset scan receives the stations stored

BALANCE -> FADER -> M-B EX -> LPF(low

pass filter) -> S-W VOL (Subwoofer Volume),

rotate the [VOLUME] knob to select a value.

BALANCE:LEFT 1-7->CENTER->RIGHT 1-7

FADER:FRONT 1-7->CENTER->REAR 1-7

M-BEX: ON/OFF

LPF: THROUGH/80/120/160

SUBW VOL: (-6)-(+6)

in preset memory in order. This function is

useful when searching for a desired station in

memory.

1. Press the [PS/AS] button.

2. When a desired station is tuned in, press

the [PS/AS] button again to continue

receiving that station.

Note:

Be careful not to press and hold the [PS/

AS] button for 1 second or longer, otherwise

the auto store function will begin and the unit

starts storing stations.

Auto store

Only stations with sufficient signal strength

will be detected and stored in the memory.

Press and hold the [PS/AS] button (1 sec.) to

start automatic station search.

To stop auto store, press other buttons

having radio functions.

Notes:

1. After auto store, the previous stored

stations will be overwritten.

2. The unit has 4 bands, such as FM1, FM2,

FM3 and AM. FM3 and AM can store

by AS function. Each bands can store

6 stations, CZ202 can store 24 stations

in total.

CZ202