- ページ 2

懐中電灯 Alcochem Hygiene UV POWERLIGHTS PDL-IIのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Alcochem Hygiene UV POWERLIGHTS PDL-II 2 ページ。

ページを印刷する

Check content:

While unpacking, check for any signs of shipment damage and, if found, notify both transporter

and supplier in writing within 8 days after receipt with full details of the damage that has occurred and retain the

equipment and packing materials for inspection. Check that all parts have been received as ordered. Make sure

that all packaging is removed from the machine before use.

Content of the box

1. PDL-II POWERLIGHT

2. Battery 3400 mAh 7.4V

3. Table holder

4. Adapter with fixed

charging cable

5. Lens cap

User instructions

1. Unscrew end cap.

2. Place provided Li-ion battery into chamber.

a. Positive pole towards the head.

3. Screw end cap back on the unit.

4. Press button to operate.

Power on: When off, press the button firmly to turn on the flashlight.

3 different light modes:

1. Press button firmly, so you hear a click to power on in White Light Mode (50 %).

2. Press button softly to get the 2

White Light Mode (100 %).

3. To activate UV-A Light press button softly again to the UV-A 365 nm Mode.

Power off: Press button firmly, so you hear a click, to turn power off.

Maintenance and attention points:

1. Only the supplied high performance rechargeable 7.4 V Li-ion battery MUST be used.

2. Avoid contact between chemicals and corrosive gasses.

The PDL-II POWERLIGHT is waterproof executed.

3. Users can lubricate the end cap screw thread one time per year to ensure smooth operation.

4. Use a soft brush and alcohol to clean, when required.

5. If the PDL-II POWERLIGHT is opened for repair, the warranty is void.

In case of a technical problem, please contact your distributor.

6. If the batteries needs to be recharged, use only the supplied inductive charger or

an approved battery charger

Make sure that the polarity of the battery is not reversed, when placed in the charger.

Battery charging time takes from 4 to 5 hours. (empty to full)

7. The PDL-II POWERLIGHT is executed with an automatic temperature switch off, activated

when the temperature of the Aluminium housing reached 50 °C. However it's recommended

not to place the PDL-II, when switched on, with it's head on the surface, as the temperature

can go up to around 100 °C.

Specifications

Power LED's

: 5x 5 W UV-A 365 nm i.c.w. 1x 5 W

Lifetime LED's

: 20.000 hours

Drop proof

: Up to a drop height 1,2 m drop proof

Material

: Aluminum T6061, PremiumType III hard anodized abrasive finish

Color

: Black

Weight

: 336 Gram (incl battery)

Handling

: Full grip, anti drop design

Battery type

: 1x 18650 Li-ion rechargeable battery - Panasonic 7.4 V - 3400 mAh

with overcharge protection

Battery life

: 3 operational hours

(based on a switching of 1 hour UV-A and 2 hrs. of white light)

Electrical supply

: 100-240 V ˜ 50-60 Hz

IP rating

: IP67

Switch

: Metal executed

Quality procedure

: ISO 9001

Life span

: Min. 5 years

Certificate

: Complies to IEC report (IEC 60598-2-8)

Manual

: Included in English language

Guarantee

: 2 years on electrical performance

white Cree LED XPG2 S3