ページを印刷する
Control Panel
Start/Stop
Press this key to start or end treatments. When the machine is on the control panel will illuminate, when the machine/treatment stops the
control panel will not illuminate.
Fan
Push this key to start/stop the fan. The control panel will illuminate if the fan is in operation, once the treatment has come to an end the
control panel will not light.
Swing Key
Push this key to stop the arms swinging refraining from any movement, by pressing this key twice the arms will resume movement.
The control panel will illuminate when the arms are in operation, when the arms are no longer in use the panel will not light.
Selecting Mode Key
By pressing this key this machine enables you to choose from one of the six built in modes, listed below...
A. Dry
B. Colouring
The control panel will illuminate the mode selected.
Temperature Keys
Press
to increase the temperature by 1 level.
Press
to decrease the temperature by 1 level.
The temperature selected will illuminate on the control panel.
Time Setting Keys
Press
to increase the time by 1minute, hold the key to increase time up to 60minutes.
Press
to decrease the temperature by 1 level, hold the key to decrease time down to 1 minute.
The temperature selected will illuminate on the control panel.
Digital Indicator
The indicator will show the time remaining on the current treatment. When the treatment has come to an end the indicator can be a LCD
time display.
C. Pre-treatment
D. Treatment
5
E. Perm
F. Manual