- ページ 2

コードレス電話 ALcom Lifestyle 1900のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ALcom Lifestyle 1900 2 ページ。

ページを印刷する

CALLER DISPLAY (NETWORK DEPENDENT)

6.3

Delete an entry in the Call List

1. Follow Steps 1 and 2 in Section 6.1.

This feature is available if you have subscribed to the Calling Line Identification

2. Press <MENU> and <UP/DOWN> to select DELETE.

service with your network service provider. Your phone can store up to 10

3. Press <OK> to confirm.

received calls with date/time information in the Call List. The number will be

6.4

Delete

all Call list entries

shown on the handset display when the phone is ringing. If the number matches

with one of the entries in your Private Phonebook, the caller's name stored in the

1. Follow Steps 1 and 2 in Section 6.1

2. Press <MENU> and <UP/DOWN> to select DELETE ALL .

private phonebook will be displayed alternately with the number, and the

3. Press <OK> to display <CONFIRM?>.

handset will ring with the ringtone associated with that phonebook entry.

4. Press <OK> to confirm. All entries will be deleted and the display will show

If the call is from someone who withheld their number

will display.

"WITHHELD"

<EMPTY>.

If the call is from someone whose number is unavailable, e.g. an international

call or from a private exchange, "OUT OF AREA" will display.

If you've got new Caller Display records, the handset will display "X NEW

CALLS" in standby mode. The New Calls indication will remain until all the new

call records have been viewed.

6.1

View the Call List

All received calls are saved in the Call List with the latest call at the top of the list.

When the call list is full, the oldest call will be replaced by a new call. Any

unanswered calls which have not been viewed are marked with a <*> icon at the

centre of the bottom line of the display.

1. Press <UP> to access the call list.

OR Press <MENU> and <UP/DOWN> to show CALL LIST, the press OK.

2. Press <UP/DOWN> to select the desired entry.

3. Press <#> to view the caller's number if applicable.

4. Press <MENU>, <UP/DOWN> to show DETAILS, and then <OK> to display

the date and time of the call. Press <OK> to go back to the previous screen.

6.2

Store a Call List Number into the Phonebook

1. Follow Steps 1 and 2 in Section 6.1.

2. Press <MENU> and <UP/DOWN> to show ADD TO PB.

3. Press <OK> and then enter the name.

4. Press <OK> and the selected call list number is displayed.

5. Edit the number if necessary.

6. Press <OK> and <UP/DOWN> to select the ringtone.

7. Press <OK> to store the phonebook entry and return to the calls list.

7.4.2

Change the dial mode

7.5

Registration

You should normally leave the dialling mode at its default setting of TONE (also

IMPORTANT: When you purchase an Lifestyle 190

called DTMF) unless the phone is connected to an old exchange that only

already registered to your base, so you do not need to register them.

recognises PULSE dialling.

Handset registration is only necessary when you buy extra handsets or if a

Note: If PULSE dialling is set, you can press the * key to switch to TONE dialling

handset has become faulty.

for the rest of that call.

You can register additional handsets to have up to five handsets per base unit,

1. Press <MENU> and <UP/DOWN> to select BS SETTINGS

with each handset's number (1 to 5) shown on its display. (Note: each handset

2. Press <OK> and <UP/DOWN> to select DIAL MODE.

can only be registered to one base.)

3. Press <OK> and <UP/DOWN> to select TONE or PULSE

(The current setting is indicated by an asterisk to the right).

To register a new handset to your base:

1. Press and hold <PAGE> on the base station for more than five seconds, to

4. Press <OK> to confirm.

put the base station into registration mode. It will stay in registration mode

7.4.3

Change the Flash (Recall) Time

for about 1 minute, so the following handset sequence must be completed

within this time.

You may need to change the recall (flash) time if your phone is connected to a

2. Press <MENU> and <UP/DOWN> to select REGISTRATION.

PBX. The recall time options are SHORT (100ms), MEDIUM (300ms) or LONG

3. Press <OK> and you are requested to enter the 4-digit system PIN.

(the default value of 600ms).

4. Enter the 4-digit system PIN.

1. Press <MENU> and <UP/DOWN> to select BS SETTINGS.

5. Press <OK> to confirm, and the display will show SEARCHING.

2. Press <OK> and <UP/DOWN> to select FLASH TIME.

If the handset registration is successful, you will hear a confirmation tone and the

3. Press <OK> and <UP/DOWN> to select your desired flash time (SHORT,

<antenna icon> will stop flashing.

MEDIUM,

LONG, with the current setting indicated by and asterisk to the

right).

The handset will automatically be allocated the next available handset number.

4. Press <OK> to confirm.

This handset number is shown in the handset display in standby mode. If the

handset registration is unsuccessful, the <antenna icon> will still flash.

7.4.4

Change the System PIN Code

7.6

Reset Your Phone

A 4-digit system PIN code is used for changing the system settings of the base

You can reset your phone to the default settings . After a reset, all your personal

station. It is used to protect your phone against unauthorized use. The default

settings, call list entries, redial list entries, and answering machine messages will

system PIN code is 0000.

be deleted but your phonebook remains

1. Press <MENU> and <UP/DOWN> to select BS SETTINGS.

1. Press <MENU> and <UP/DOWN> to select DEFAULT.

2. Press <OK> and <UP/DOWN> to select CHANGE PIN.

2. Press <OK> and you are requested to enter the 4-digit system PIN.

3. Press <OK> and you are requested to enter the 4-digit system PIN.

3. Enter the 4-digit system PIN.

4. Enter the old system PIN.

4. Press <OK> to display CONFIRM?

5. Press <OK> and enter the new system PIN.

5. Press <OK> to confirm, and the phone will be reset to its default settings.

6. Press <OK> and enter the new system PIN again.

Note: If the new PIN entered in Step 6 is not the same as the new system PIN

entered in Step 5, you must enter the new system PIN at step 5 again.

7. Press <OK> to confirm

PHONE SETTINGS

Your phone comes with a selection of settings that you can change to

personalise your phone the way you like it to work.

7.1

Date and Time Settings

If you subscribe to Caller Display the time and date settings will be automatically

updated by the

network when you receive an incoming call. (For FS Data only)

The Caller Display service only sends the month and date, not the year, so you

may need to set the year.

7.1.1

Change the Date Format

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select DATE & TIME.

3. Press <OK> and <UP/DOWN> to select DATE FORMAT.

4. Press <OK> and <UP/DOWN> to select your desired date format

(DD-MM-YYor MM-DD-YY ).

5. Press <OK> to confirm.

7.1.2

Change the Time Format

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select DATE & TIME.

3. Press <OK> and <UP/DOWN> to select TIME FORMAT.

4. Press <OK> and <UP/DOWN> to select your desired time format

(12 HR or 24 HR).

5. Press <OK> to confirm.

7.1.3

Set the Time

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select DATE & TIME.

3. Press <OK> and <UP/DOWN> to select SET TIME.

4. Press <OK> and then enter the time information in 24 hour format.

5. Press <OK> to confirm.

Note: If time has been set before, the current time will display, otherwise,

"HH:MM" will display.

7.1.4

Set the Date

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select DATE & TIME.

3. Press <OK> and <UP/DOWN> to select SET DATE.

4. Press <OK> and then enter the date information. The date entered will be in

the date entered will be in the format you set in Section 7.1.1.

5. Press <OK> to confirm.

Note: If date has been set before, the current date will display, otherwise,

"DD-MM-YY " will display.

TROUBLESHOOTING

0 system, all handsets are

Problem

Causes

a.The connection cord of

No dialing tone when

pressing <TALK ON>

key

the base station is not

plugged in.

b.The adapter cord is not

plugged in correctly in

the base station.

c. Another handset is using

the base to make a call.

d. Wrong telephone line cord

When connect to a PBX,

Dialing prefix is needed.

no and/or wrong connection

after dialing.

a. Base station out of

"SEARCHING" is displayed.

range.

b. Base station not

connected to mains.

Service not activated or

The call does not work.

wrong operator or wrong

setting

No display.

Empty battery

Please contact the technical support of the network provider for further information.

This telephone is not equipped with a grounding function

the functions may be limited when

used in PBX systems.

Technical Support

If the fault persists...

unchanged.

Disconnect all other instruments connected to the same line as the

Lifestyle 1900 system and try to make a call.

Disconnect the base unit from the telephone line and plug a different phone into

the master telephone socket.

Try making a call. If this works, the line is OK.

If the call does not work, and you are using a two-way socket adapter, remove

it and plug a telephone directly into the socket. If the call now works, the adapter

may be faulty.

7.2

Alarm Settings

You can set an alarm time on this phone. When an alarm is set, the <ALARM

Icon> is shown on the handset display.When the alarm time is reached, the

<ALARM icon> and "ALARM ON" flash on the handset display, and the alarm

tone rings for 45 seconds. You can press any key to disable the alarm. If the

snooze function is activated, the alarm will sound again at the end of the snooze

period of seven minutes. You can also press and hold <TALK OFF> while the

alarm is sounding, to stop the alarm and turn off the snooze function.

Note:

a. A key press will still disable the alarm even if the handset keypad is locked

when the alarm rings.

b. The alarm volume level is the same as the settings of the handset ringer

volume. If the handset ringer is set to VOLUME OFF, the alarm still sounds

at VOLUME 1 level.

c. During an external call or internal call, if an alarm is set and when the alarm

time is reached, the <ALARM icon> and "ALARM ON" will still flash. An

alarm tone will be emitted from the earpiece to alert the user the alarm time

is reached. Once the user presses any key or presses and holds.

<TALK OFF> to disable the alarm, the display will revert to the call duration.

d. During paging or ringing, the alarm will not sound when the alarm time is

reached. However, if the snooze function is enabled and there is no paging

or ringing, the alarm will sound again at the end of the snoo

7.2.1

Turn on/off the Alarm

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select ALARM.

3. Press <OK> and <UP/DOWN> to select ON/OFF.

4. Press <OK> to confirm.

Note: If ON is selected, you will be asked to set the alarm time.

7.2.2

Set the Alarm Time (If Alarm time is set to be ON)

1. Follow Steps 1 to 4 in Section 7.2.1.

2. Enter the alarm time in 24 hour format.

3. Press <OK> to display "SNOOZE".

4. Press <OK> and <UP/DOWN> to select snooze ON or OFF.

5. Press <OK> to confirm.

7.3

Handset Settings

7.3.1

Set the Ringer Melody for Internal Calls

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS .

2. Press <OK> and <UP/DOWN> to select RING SETUP

3. Press <OK> and <UP/DOWN> to select INT RING.

4. Press <OK> and <UP/DOWN> to select the melody you want to hear for

internal calls.

GUARANTEE AND SERVICE

Solutions

Note: Due to continuous product development all features and specifications are

a.Check the connections. Unplug

subject to change without prior notice

and plug back in the mains.

Please register your warranty online at -

Check that the telephone cord

http://www.alcomonline.com/warranty.html

has been plugged into the base

station and the phone socket.

b.Check the base station plug and

For more Information on Warranty and Product Support in Singapore please call

the 230V plug (remove and plug-in).

(65) 68412668 or Fax to (65) 68412628.

c.Wait until the line is unoccupied.

Email: [email protected]

d.Use the original telephone line

Website:

www.alcomonline.com

cord supplied

Insert the dialing prefix

Reduce the range.

Connect base station to

mains.

Check your Subscription with

network or change the dial mode.

Recharge battery

, and therefore some of

Note: The respective melody will be played while browsing the ringtone list.

5. Press <OK> to confirm.

7.3.2

Set the Ringer Melody for External Calls

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select RING SETUP.

3. Press <OK> and <UP/DOWN> to select EXT RING.

4. Press <OK> and <UP/DOWN> to select melody you want to hear for external

calls.

Note: The respective melody will be played while browsing the ringtone list.

5. Press <OK> to confirm.

7.3.3

Set the Ringer Volume

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select RING SETUP.

3. Press <OK> and <UP/DOWN> to select RING VOLUME.

4. Press <OK> and <UP/DOWN> to select the desired ringer volume (a total of

6 ringer volume levels including VOLUME OFF).

Note: The respective ringer volume will be played during your selection.

If VOLUME OFF is selected, the <Ringer Off> icon will be displayed.

5. Press <OK> to confirm.

7.3.4

Set Alert Tones

ze period

Three different alert tones are set on by default, but can be turned off, if desired.

Key Tone - a single beep is emitted when you press a key.

Low Battery Tone - emitted while you are talking on the phone to alert you that

you need to charge the handset batteries.

Out of Range Tone - emitted while you are talking on the phone to alert you to

move loser to the base unit, before the call is lost.

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select TONE SETUP.

3. Press <OK> and <UP/DOWN> to select KEY TONE / BATTERY TONE /

OUT OF RANGE.

4. Press <OK> and <UP/DOWN> to turn on or off these tones.

5. Press <OK> to confirm.

7.3.5

Set the Handset Language

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select LANGUAGE.

3. Press <OK> and <UP/DOWN> to select the desired language.

4. Press <OK> to confirm.

V er 1.

0 D e c 2 00 9

7.3.6

Rename the Handset

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS

2. Press <OK> and <UP/DOWN> to select RENAME HS.

3. Press <OK> and change the name of your handset, using <C/MUTE> to delete

letters and the alphanumeric keys to enter up to 10 letters for the name.

4. Press <OK> to confirm.

7.3.7

Choose the Information to be Displayed in Idle

You can choose to display time or handset name in your idle screen.

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select HS DISPLAY.

3. Press <OK> and <UP/DOWN> to select HANDSET NAME or TIME.

4. Press <OK> to confirm.

7.3.8

Set the Auto Answer

If you turn on the Auto Answer, you can answer a call automatically by just lifting

the handset off the base or charger, without having to press any key.

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select AUTO ANSWER.

3. Press <OK> and <UP/DOWN> to turn on or off the auto answer feature.

4. Press <OK> to confirm.

7.4

Base Settings

7.4.1

De-register a Handset

This operation should only be necessary if one of your handsets becomes faulty

or lost and needs to be replaced.

You will need to enter the 4-digit System PIN (Default PIN is 0000) in order to

de-register a handset from the base station.A de-registered handset will have

the antenna icon flashing and "REGISTER" on the display.

Note: You cannot de-register the handset that you are currently using.

1. Press <MENU> and <UP/DOWN> to select

BS SETTINGS .

2. Press <OK> and <UP/DOWN> to select DELETE HS.

3. Press <OK> and the display shows "PIN?".

4. Enter the 4-digit system PIN.

5. Press <OK> and the first handset number is displayed.

6. Press <UP/DOWN> to scroll through the list of registered handsets and

select the number of the handset you want to de-register.

7. Press <OK> to confirm, and the chosen handset will be de-registered.